Shop – Page 5 – Dominion Air & Machinery

3ntr A2

With a 3D Printer from 3ntr, you will achieve prototypes that you never thought possible.

Wide range of materials
Temperature-Controlled build chambers
Generous capacity
Simultaneously prints 3 different materials
High quality, funcional parts
Low cost per part
Accurate, repeatable process.

3d printer brochure

3ntr A4

With a 3D Printer from 3ntr, you will achieve prototypes that you never thought possible.

Wide range of materials
Temperature-Controlled build chambers
Generous capacity
Simultaneously prints 3 different materials
High quality, funcional parts
Low cost per part
Accurate, repeatable process.

3d printer brochure

YCM NXV560A-APC

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
Direct drive provides backlash free, best accuracy, reliability and stability.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T) 1.8 sec.
Tool Magazine Capacity: 24T
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>
Pallet Size: 560 x 410 mm 22.04″ x 16.14″
Table Load Capacity: 120 kg 265 lb
Distance Between Spindle Nose and Table Top: 25 ~ 475 mm 0.98″~18.7″
Hole Pattern: M12 x 80 mm x 80 mm M12 x 3.15″ x 3.15″

YCM NXV600A

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
Direct drive provides backlash free, best accuracy, reliability and stability.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T): 1.8 sec.
Tool Magazine Capacity: 24T
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>

YCM NXV1020A

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Grease lubrication for 12,000 rpm spindle as a standard
Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
Direct drive provides backlash free, best accuracy, reliability and stability.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T): 1.8 sec.
Tool Magazine Capacity: 24T (30T/40T opt.)
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>

YCM NXV1020AM

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Oil-air lubrication for 12,000 rpm spindle as a standard.
Oil-air lubrication for 15,000 rpm spindle (opt.)
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
Direct drive provides backlash free, best accuracy, reliability and stability.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T): 1.8 sec.
Tool Magazine Capacity: 24T (30T/40T opt.)
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>

YCM NXV1380A

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Grease lubrication for 12,000 rpm spindle as a standard.
Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
Direct drive provides backlash free, best accuracy, reliability and stability.
High rigidity and high loading linear guideways applied on the three axes.
6 slide blocks on X-axis and 4 linear guideways on Y-axis
No counter weight on Z-axis
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T): 1.8 sec.
Tool Magazine Capacity: 24T (30T/48T/60T opt.)
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>
Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]

YCM NXV1680A

Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
High precision helical springs features high dynamic balance and low vibration.
Grease lubrication for 12,000 rpm spindle as a standard.
Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed.
Direct drive provides backlash free, best accuracy, reliability and stability.
High rigidity and high loading linear guideways applied on the three axes.
6 slide blocks on X-axis and 4 linear guideways on Y-axis
No counter weight on Z-axis
The rigid body construction makes for uncompromising precision and rigidity.
Absolute encoder ATC system provides high stability and speed.
Inverter controlled, prevents tool change speed from changing under different power supply frequency.
Tool change speed can be adjustable for heavy tools.
Auto Tool Change (T-T) 1.8 sec.
Tool Magazine Capacity: 24T (30T/48T/60T opt.)
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Coolant shower for efficient chip removal <NXV Series std.>
Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]

YCM NXV1680B

Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48 kgf-m 347.19 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36 kgf-m 260.39 lb-ft. (option).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
Direct drive provides backlash free, best accuracy, reliability and stability.
High rigidity and high loading linear guideways applied on the three axes.
6 slide blocks on X-axis and 4 linear guideways on Y-axis
No counter weight on Z-axis
The rigid body construction makes for uncompromising precision and rigidity.
Auto Tool Change (T-T): 4.2 sec.
Tool Magazine Capacity: 32T (24T/40T opt.)
High Stability Tool Magazine
Driven by pneumatic cylinder.
Prevent coolant and chips from entering tool magazine.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Smooth chip removal.
Quad chip augers (4 Y-axial) system ensures fluent chip removal prevent chips from piling up. [with Rear Side Chip Conveyor (opt.)]

YCM NMV76A

Adopted consistent production process, box guideway type models with high shock absorption and wear resistance, are the best for heavy cutting.
The rigid body construction makes for uncompromising precision and rigidity.
Finite Element Method analysis (FEM) is adopted to simulate the structural deformation of the body under various conditions,integrated with YCM hand scrapping skills for box guideways, which ensures the best accuracy and life.
Boxway design on three axis is suitable for heavy cutting.
The wide span 650mm Y-axis with rigid dual-wall saddle design fully supports table movement.
No counter weight on Z-axis provides the best dynamic accuracy.
Symmetrical Head Stock design homogeneously absorbs the thermal expansion and avoids thermal deformation.
High precision ceramic ball bearing with low centrifugal force, low vibration and low coefficient of thermal expansion.
Tool unclamping cushion design extends spindle bearing life by protecting spindle bearing from tool unclamping force.
12,000 rpm direct-drive spindle features high precision helical springs for excellent balance, suitable for parts machining.
The optional 8,000 rpm spindle design incorporates gear transmission is capable of reaching 45.04 kgf-m 325.78 lb-ft torque; perfect for casting and titanium machining.
The optional 10,000 rpm spindle combines with gear transmission for heavy cutting. Even using the small-diameter tools for high speed cutting can achieve refined machining roughness (Spindle cooling system: std.)
The bi-directional tool selection design takes the shortest random path.
The standard tool magazine is equipped with 24T, for more machining demands, the tool magazine can be expanded to 30T.
Absolute encoder and inventor control in ATC improve the tool change time 1.8 sec. only.
Tool change speed can be adjustable.
Pneumatic cylinder driven.
Prevent coolant and chips from entering tool magazine.
The best L/W ratio.
Secure the utmost cutting rigidity.
The Z-axial movement is very smooth.
The Z-axis is outside support design
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Smooth chip removal.

YCM NMV106A

Adopted consistent production process, box guideway type models with high shock absorption and wear resistance, are the best for heavy cutting.
The rigid body construction makes for uncompromising precision and rigidity.
Finite Element Method analysis (FEM) is adopted to simulate the structural deformation of the body under various conditions, integrated with YCM hand scrapping skills for box guideways, which ensures the best accuracy and life.
Boxway design on three axis is suitable for heavy cutting.
The wide span 800 mm Y-axis with rigid dual-wall saddle design fully supports table movement.
No counter weight on Z-axis provides the best dynamic accuracy.
Symmetrical Head Stock design homogeneously absorbs the thermal expansion and avoids thermal deformation.
High precision ceramic ball bearing with low centrifugal force, low vibration and low coefficient of thermal expansion.
Tool unclamping cushion design extends spindle bearing life by protecting spindle bearing from tool unclamping force.
12,000 rpm direct-drive spindle features high precision helical springs for excellent balance, suitable for parts machining.
The optional 8,000 rpm spindle design incorporates gear transmission is capable of reaching 45.04 kgf-m 325.78 lb-ft torque; perfect for casting and titanium machining.
The optional 10,000 rpm spindle combines with gear transmission for heavy cutting. Even using the small-diameter tools for high speed cutting can achieve refined machining roughness (Spindle cooling system: std.)
The bi-directional tool selection design takes the shortest random path.
The standard tool magazine is equipped with 24T, for more machining demands, the tool magazine can be expanded to 30T/40T.
Absolute encoder and inventor control in ATC improve the tool change time 1.8 sec. only.
Tool change speed can be adjustable.
Pneumatic cylinder driven.
Prevent coolant and chips from entering tool magazine.
The best L/W ratio.
Secure the utmost cutting rigidity.
The Z-axial movement is very smooth.
Full enclosure exterior (including top cover).
Convertible side window for convenient chip removal.
Aesthetic rear cover design.
Smooth chip removal.
Dual chip augers combined with chip conveyor for fast chip disposal (opt.)

YCM NSV66A

The unique IDD spindle with speed of up to 12,000 rpm and ceramic bearings offer low spindle vibration and optimal heat isolation.
High performance spindle motor of 22 kW 30 HP output
Result in excellent surface finish while maximizing both spindle and tool life under hard milling conditions.
X/Y/Z axes equipped with the roller type linear guideways and large diameter ball screw that maximize aluminum chip disposal during processing
Extra large delta machine column
Double-nut ball screw with high performance axial servo motor
Wide distance between guideways
Advanced design with reinforced body structure through FEM analysis, the NSV series offers superb cutting performance and reduced vibration to meet the highest machining demand.
Minimizes the vibration during tool change
Tool magazine capacity: 30T
Automatic chip shield

YCM NSV66AM

The unique IDD spindle with speed of up to 12,000 rpm and ceramic bearings offer low spindle vibration and optimal heat isolation.
High performance spindle motor of 22 kW 30 HP output
Result in excellent surface finish while maximizing both spindle and tool life under hard milling conditions.
Maximum spindle speed: 20,000 rpm
Superb spindle cooling system with YCM patent provides minimum spindle vibration.
Rear bearing floating design
Micro oil-air lubrication system
BBT40 double contact spindle taper
X/Y/Z axes equipped with the roller type linear guideways and large diameter ball screw that maximize aluminum chip disposal during processing
Extra large delta machine column
Double-nut ball screw with high performance axial servo motor
Wide distance between guideways
Advanced design with reinforced body structure through FEM analysis, the NSV series offers superb cutting performance and reduced vibration to meet the highest machining demand.
Minimizes the vibration during tool change
Tool magazine capacity: 30T
Automatic chip shield

YCM NSV106A

The unique IDD spindle design offers smooth reliability at high speed.
Ceramic bearings do not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
IDD PLUS Spindle Design: HIGH PRECISION HIGH SPEED
High Rigidity Structural Design
Large delta machine column and base ensure the highest stability during high speed movement.
X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to the 4 slide blocks of the older model.
Y-axis guideway span with optimal ratio
Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
45-type guideways on X/Y-axis have a super load capacity of up to 700 kg.
One-piece Motor Housing
High Rigidity Structural Design
Efficient Chip Removal System
Equipped with triple-chip augers as a standard.
Dual-chip augers as an option.
Efficient Chip Removal System
Reliable Automatic Tool Change
Auto tool change(T-T): 1.8 Sec.
24T (30T opt.) Disk Type
48T (opt.) Chain Type

YCM NSV106AS

The unique IDD spindle design offers smooth reliability at high speed.
Ceramic bearings do not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
Spindle cooling unit decrease thermal deformation on spindle headstock.
Micro oil-air lubrication system minimizes thermal deformation and prolongs spindle life.
Large delta machine column and base ensure the highest stability during high speed movement.
X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to the 4 slide blocks of the older model.
Y-axis guideway span with optimal ratio
Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
X/Y-axis equipped with 45-type guideways, which has a super load capacity of up to 1,000 kg.
One-piece Motor Housing
Equipped with dual-chip augers and chain type chip conveyor definitely help maximize the efficiency of chip removal.
Auto tool change(T-T): 1.8 sec.
30T Disk Type
48T (opt.) Chain Type
Standard ATC Door
Rapid Feedrate (X/Y/Z): 48 / 48 / 48 m/min.
Axial Acceleration: 1 G (FANUC)

YCM NSV106AM

The unique IDD spindle design offers smooth reliability at high speed.
Ceramic bearings not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
Spindle cooling unit decrease thermal deformation on spindle headstock.
Micro oil-air lubrication system minimizes thermal deformation and prolongs spindle life that are well-suited for die & mold industry.
Large delta machine column and base ensure the highest stability during high speed movement.
X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to the 4 slide blocks of the older model.
Y-axis guideway span with optimal ratio
Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
X/Y-axis equipped with 45-type guideways has a super load capacity of up to 700 kg.
One-piece Motor Housing
Equipped with triple-chip augers as a standard.
Dual-chip augers as an option.
Auto tool change(T-T): 1.8 sec.
24T (30T opt.) Disk Type
48T (opt.) Chain Type
Perfect for die & mold, aerospace and automotive applications.
Ultra-high controllability and stability.

YCM NSV106AMS

The unique IDD spindle design offers smooth reliability at high speed.
Ceramic bearings not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
Spindle cooling unit decrease thermal deformation on spindle headstock.
Micro oil-air lubrication system minimizes thermal deformation and prolongs spindle life that are well-suited for die & mold industry.
Large delta machine column and base ensure the highest stability during high speed movement.
X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to the 4 slide blocks of the older model.
Y-axis guideway span with optimal ratio
X/Y-axis equipped with 45-type guideways, which has a super load capacity of up to 1,000 kg.
Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
One-piece Motor Housing
Equipped with triple-chip augers as a standard.
Dual-chip augers as an option.
Auto tool change(T-T): 1.8 sec.
24T (30T opt.) Disk Type
48T (opt.) Chain Type

YCM NSV156A

The unique IDD spindle with speed of up to 12,000 rpm and ceramic bearings offer low spindle vibration and optimal heat isolation
High performance spindle motor of 22 kW 30 HP output
Result in excellent surface finish while maximizing both spindle and tool life under hard milling conditions.
X/Y/Z axes equipped with the stable linear guideways and wide ball screw that maximize aluminum chip disposal during processing.
Extra large delta machine column
Double-nut ball screw with high performance axial servo motor
Wide distance between guideways
Advanced design with reinforced body structure through FEM analysis, the NSV series offers superb cutting performance and reduced vibration to meet the highest machining demand.
Minimizes the Vibration During Tool Change
Standard 30T Tool Magazine
Automatic Chip Shield
Quad-chip auger (std.) for large amount of aluminium chips removal

YCM NFX380A

Extra wide column and base design to ensure best support and cutting rigidity.
High quality and rugged MEEHANITE® casting maintains optimum accuracy.
Linear guideways adopted for fast and smooth axial movement.
Pre-tensioned ball screws with direct drive motors achieve high torque and low backlash.
Rotary table surface leveled at the C-axis center to ensure machining accuracy and easy programming.
ø380 mm (ø14.96″) table size with ø80 mm (ø3.15″) table-through hole design.
150°( 30°/ -120°) A-axis tilting angle increases the ability of machining.
Hydraulic or pneumatic cable preparation. (Opt.)
A/C-axis linear encoder. (std.)
30T storage capacity is standard.
40T/60T is servo driven. (opt.)
ATC tool door design is standard that prevents coolant and chips from entering tool magazine.
YCM self-manufactured IDD PLUS spindle.
Powerful 22 kW, 12,000 rpm spindle for hi-power, hi-speed machining.
Cooling system design on spindle motor seat, quill, and bearing offers most reliable machining capability.
BBT40 Spindle Design with spindle and taper dual surface contact ensures longer tool life, and exceptional cutting rigidity with high accuracy.
Enhance precision, quality and efficiency of 3D surface machining.
Reduce tool length and increase rigidity to obtain superior machining quality.
Cutting with the belly and edge of the tool to increase tool life.
Reduce fixture error and lessen workpiece loading/uploading time.
Saves manufacturing cost for fixture and electrode costs.
Reduces machining process, machining cost while improving productivity.
Increase productivity through unmanned machining.
Enhance quality and reliability of products.
Reduce non-cutting or change waiting time.

YCM NFX400A

Extra wide column and base design to ensure best support and cutting rigidity.
High quality and rugged MEEHANITE® casting maintains optimum accuracy.
Linear guideways adopted for fast and smooth axial movement.
Pre-tensioned ball screws with direct drive motors achieve high torque and low backlash.
150°(+30°/ -120°) A-axis tilting angle increases the ability of machining.
Rotary table surface is at the same level as the 5th axis centerline to ensure machining accuracy.
ø350 mm (ø13.78″) table size with ø50 mm (ø1.97″) table-through hole design.
Workpiece Dimensions ø400 x 310 mm (ø15.75″ x 12.2″).
6 Piping preparation for fixture (Air pressure x 2 + Hydraulic x 4).
24T (30T opt.) Disk type.
40 / 60 / 90 / 120T (opt.) Chain type.
ATC door design is standard that prevents coolant and chips from entering tool magazine.
YCM self-manufactured 12,000 rpm IDD PLUS spindle.
Spindle Power 22 kW, 15,000 rpm spindle (opt.) for hi-power, hi-speed machining.
Cooling system design on spindle motor seat, quill, and bearing offers most reliable machining capability.
Micro Oil-air Lubrication System (opt.)
Reliable Helical Disc Spring
Simultaneous Taper & Flange Contact Design
BBT40 Spindle Design with spindle and taper dual surface contact ensures longer tool life, and exceptional cutting rigidity with high accuracy.
Enhance precision, quality and efficiency of 3D surface machining.
Reduce tool length and increase rigidity to obtain superior machining quality.
Cutting with the belly and edge of the tool to increase tool life.
Reduce fixture error and lessen workpiece loading/uploading time.
Saves manufacturing cost for fixture and electrode costs.
Reduces machining process, machining cost while improving productivity.
Increase productivity through unmanned machining.
Enhance quality and reliability of products.
Reduce non-cutting or change waiting time.

YCM NTV158A

With the unique T-base structure, the machine footprint can be reduced effectively.
Overhang-free table movement is supported by high-rigidity base to ensure the best dynamic accuracy.
Dual screw-type chip augers efficiently elevate chip removal rate.
Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity.
Reduces noise, backlash and vibration issues and maximizes spindle accuracy and life.
YCM’s uniquely designed IDD Spindle ensures direct transmission and is proven to maximize both spindle and tool life under harsh working environment.
The cooling system for spindle motor seat and spindle makes real time control of spindle temperature.
The oil-air lubrication system ensures long-term high-speed operation.
All axes are equipped with roller type linear guideways to ensure higher dynamic accuracy, durability and rigidity.
Preload high precision ball screws are directly driven by servo motor will efficiently eliminate axial backlash and vibrations.
X-axis with 6 guideway blocks fully supports the saddle and efficiently releases loading from the table.
Y-axis is designed with 3 guideways maintaining exceptional dynamic accuracy.
Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity
High response axial control provides smooth movement.
Low inertia avoids vibration during high speed feedrate.

YCM NTV158B

With the unique T-base structure, the machine footprint can be reduced effectively.
Overhang-free table movement is supported by high-rigidity base to ensure the best dynamic accuracy.
Dual screw-type chip augers efficiently elevate chip removal rate.
Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity.
Reduces noise, backlash and vibration issues and maximizes spindle accuracy and life.
YCM’s uniquely designed IDD Spindle ensures direct transmission and is proven to maximize both spindle and tool life under harsh working environment.
The cooling system for spindle motor seat and spindle makes real time control of spindle temperature.
The oil-air lubrication system ensures long-term high-speed operation.
All axes are equipped with roller type linear guideways to ensure higher dynamic accuracy, durability and rigidity.
Preload high precision ball screws are directly driven by servo motor will efficiently eliminate axial backlash and vibrations.
X-axis with 6 guideway blocks fully supports the saddle and efficiently releases loading from the table.
Y-axis is designed with 3 guideways maintaining exceptional dynamic accuracy.
The casting rigidity is enhanced through FEM analysis.
Roller type guideways provides low friction which reduces energy waste.
Increases the feedrate and acceleration/deceleration.
High response axial control provide smooth movement.
Low inertia avoids vibration during high speed feedrate.
Dual drive system on Z-axis elevates exceptional axial smoothness and machining efficiency, and ensures fine surface roughness.
Up to 15,000 rpm (HSK A100) spindle is available to meet different machining demands.

YCM TCV2000A

Wide span design of machine structure.
High efficiency traveling column design.
Large delta machine column and base ensure highest stability.
With FEM analysis.
With stepped design and 6 slider blocks on X-axis ensure the ultra reliable axial movement.
Large working area is ideal for large and long workpieces machining.
With the installation of dividing wall in the working area, both long and complex parts can be manufactured in the same machine.
High precision roller type guideways on all 3 axes
X-axis is capable of reaching up to 40 m/min rapid feedrate.
Circulated cooling system design on X-axis ensures stable temperature and optimal accuracy.
No counter weight design on Z-axis that lowers vibration while machining and greatly improves surface roughness.
Extra guideway blocks support ATC magazine to ensure smooth and stable movement.

YCM TCV3000A

Wide span design of machine structure.
High efficiency traveling column design.
Large delta machine column and base ensure highest stability.
With FEM analysis.
With stepped design and 6 slider blocks on X-axis ensure the ultra reliable axial movement.
Large working area is ideal for large and long workpieces machining.
With the installation of dividing wall in the working area, both long and complex parts can be manufactured in the same machine.
High precision roller type guideways on all 3 axes
X-axis is capable of reaching up to 40 m/min rapid feedrate.
Circulated cooling system design on X-axis ensures stable temperature and optimal accuracy.
No counter weight design on Z-axis that lowers vibration while machining and greatly improves surface roughness.
Extra guideway blocks support ATC magazine to ensure smooth and stable movement.

YCM TCV3000A-5AX

Wide span design of machine structure.
High efficiency traveling column design.
Large delta machine column and base ensure highest stability.
With FEM analysis.
With stepped design and 6 slider blocks on X-axis ensure the ultra reliable axial movement.
Large working area is ideal for large and long workpieces machining.
With the installation of dividing wall in the working area, both long and complex parts can be manufactured in the same machine.
High precision roller type guideways on 3 axes
Capable of reaching up to 40 m/min rapid feedrate.
Circulated cooling system design on X-axis ensures stable temperature and optimal accuracy.
Centroid driven on X-axis to reduce vibration during movement.
No counter weight design on Z-axis that lowers vibration while machining and greatly improves surface roughness.
The guide blocks support tool magazine to ensure smooth and stable movement.
Reliable ATC system: Tool magazine with 40T. (80T opt.)
speed (B-axis): 33.3 rpm
Swivel angle (B-axis): ±110° / ±120° (Big torque opt.)
speed (C-axis): 50 rpm (FANUC opt.) / 90 rpm (HEIDENHAIN std.)
Positioning accuracy (C-axis): <10 sec.
The YCM in-house built-in spindle effectively lowers vibration, providing the best surface performance. Meanwhile, it prolongs lifespan of spindle and tools during heavy cutting.
BBT40 double contact spindle taper greatly enhances machining accuracy.
Up to 16,000 rpm spindle, 50 kW 67 HP outputs and Swivel angle 120°, best for heavy cutting. (opt.)
Tool shank: HSK A63 (opt.)

YCM TV116B

he unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Number of tool posts in magazine can be selected for 24T/32T/40T.
The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
The swivel operation panel of appropriate height and clear modular switches can be operated easily.
Clearly display the signals and alarm messages.
Detachable MPG handwheel is installed for operational convenience.

YCM TV116B-APC

The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Number of tool posts in magazine can be selected for 24T/32T/40T.
The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Reliable APC system with the unique design of shuttle type mechanism successfully shortens loading and uploading time thus increases efficiency.
Pallet change time: 25 sec.
Table Load Capacity: 600 kg
The swivel operation panel of appropriate height and clear modular switches can be operated easily.
Clearly display the signals and alarm messages.
Detachable MPG handwheel is installed for operational convenience.

YCM TV146B

The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Number of tool posts in magazine can be selected for 24T/32T/40T.
The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
The swivel operation panel of appropriate height and clear modular switches can be operated easily.
Clearly display the signals and alarm messages.
Detachable MPG handwheel is installed for operational convenience.

YCM TV158B

The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kg-m 347.48 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (opt.).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Number of tool posts in magazine can be selected for 24T/32T/40T.
The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
The swivel operation panel of appropriate height and clear modular switches can be operated easily.
Clearly display the signals and alarm messages.
Detachable MPG handwheel is installed for operational convenience.

YCM TV188B

The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
Number of tool posts in magazine can be selected for 24T/32T/40T.
The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
The swivel operation panel of appropriate height and clear modular switches can be operated easily.
Clearly display the signals and alarm messages.
Detachable MPG handwheel is installed for operational convenience.
Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.