3ntr A2
3ntr A2

With a 3D Printer from 3ntr, you will achieve prototypes that you never thought possible.

  • Wide range of materials
  • Temperature-Controlled build chambers
  • Generous capacity
  • Simultaneously prints 3 different materials
  • High quality, funcional parts
  • Low cost per part
  • Accurate, repeatable process.

3d printer brochure

Read more
3ntr A4
3ntr A4

With a 3D Printer from 3ntr, you will achieve prototypes that you never thought possible.

  • Wide range of materials
  • Temperature-Controlled build chambers
  • Generous capacity
  • Simultaneously prints 3 different materials
  • High quality, funcional parts
  • Low cost per part
  • Accurate, repeatable process.

3d printer brochure

Read more
CK Universal Lathe
CK Universal Lathe

Kingston’s CK Universal model uses its big features to combine powerful heavy-duty cuts with high accuracy. The 4-speed headstock and robust spindle construction are built for high turning torque (9,000 N-m at low speeds), while the heavily ribbed one-piece casting and brawny 28-inch wide 2 V-way bed provide extreme rigidity when cutting large-diameter workpieces. The CK Universal’s greater loading capacity and ability to handle the hardest materials – even titanium alloys – make it an ideal choice for the toughest jobs. Available in 4 bore sizes (7.09”, 10.1”, 12.5, and 14.8”), 4 swing diameters up to a massive 50”, and lengths from 40” – 200.”

 

 

Standard Features

  • Bore: 7.09”, 10.1”, 12.5”, or 14.8”
  • Swing: 34”, 40”, 46”, or 50” (46” & 50”

CK 7/10 Only)

  • C.C.: 80” – 200”
  • CK 7: 30 HP / 35 HP (30 min)
  • CK 10 / CK 12 / CK 14: 40/50 HP (30 min)
  • 28” Bed Width, One-Piece Casting
  • Box Way Cross Slide on Carriage
  • V8 Turret
  • Headstock Cooling System
  • Front & Rear Chip Conveyor
  • Hydraulic and Manual Quill Movement
  • Fanuc 0iTF Controller with Manual Guide i

& Thread Repair, 10.4” LCD Monitor

 

Optional Accessories

  • Cs-Axis with One-Degree Indexing
  • Live Tooling Turret
  • H4 Hydraulic Turret or T-Slot on Tool Block
  • Rear Turret
  • 6” Boring Bar Support
  • Variable Speed Threading
Read more
Kingston CJ Series – Teach-in Lathe
Kingston CJ Series – Teach-in Lathe

 

  • Convenient teach-in operating experience
  • Precise, versatile, and highly productive universal lathe.
  • This model features a 20”, 22” or 26” swing, lengths from 60” – 120” (160”, 200”, and 240″ CC available in 26″ swing only)
  • Equipped with the user-friendly Fagor 8060FL controller with handwheels (Fanuc 0iTF and Siemens 828D also available).
  • Ideal for a machine shop transitioning to CNC and for technical schools that train machinists.
  • The CJ and its intuitive conversational programming language are a perfect bridge between manual skills and actual CNC programming.

 

Standard Features

  • Fagor 8060FL Control with FS5-A110 (CJ 20 & 22) or FS5-A150 (CJ 26) AC Spindle Servo Motor
  • Two Electric Handwheels on Control Panel
  • One Remote HPG Handwheel
  • Two T-Slots on Cross Slide
  • Headstock, Slide Ways & Ball Screw Auto-Lube
  • Full Enclosure End Guard
  • Front Moveable Chip Cart
  • Full Length Rear Splash Guard
  • Cooling System

 

Optional Accessories

  • 1″ Spindle Bore Upgrade (CJ 26 only)
  • Fanuc 0iTF Controller with Manual Guide i & β12i (CJ 20/22) or βiIP240 (CJ 26) Spindle Servo Motor
  • Fanuc 0iTF Controller with Manual Guide i & α22i (CJ 26) Spindle Servo Motor
  • Siemens 828D Control with Shop Turn & 1PH8107 (CJ 20/22) or 1PH8133 (CJ 26) Spindle Servo Motor
  • Full C-Axis
  • V12 Live Tooling Turret
  • V8 Turret
  • Auto 4-Way Toolpost
  • Rear Chuck Adapter (4.1″ & 6.1” bore only)
  • Small Steady Rest (1.97″ – 8.27″)
  • Medium Steady Rest (7.87″ – 14.96″)
  • Large Steady Rest – CJ 26 only (11.81” – 17.72”)
  • Follow Rest (.79” – 6.3”)
  • Aloris Quick Change Tool Post & Sets
  • Boring Bar Holder on Cross Slide (CJ 26 only)
  • Hydraulic Tailstock
  • V8 Turret (as shown above), V12 Turret
  • Air, Manual, & Hydraulic Chucks
Read more
Kingston CK Chucker
Kingston CK Chucker

Kingston’s CK Chucker is a rough turning beast that excels at high-volume facing, boring, and drilling of large-diameter workpieces. The powerful H6 350 turret sits atop a specially designed carriage with a larger contact surface area and uniquely designed box way cross slide. The heavily ribbed one-piece casting allows for high loading capacity, extreme rigidity, and vibration buffering. All of this and the 28″ wide 2 V-way bed provide the unsurpassed stability and heavy cutting capability Kingston built its name on. The Chucker comes equipped with a 4-speed headstock for maximum torque and comes front- and rear-chuck ready.

Standard Features

  • Bore: 9.25″, 12.5″ or 14.7″
  • Swing: 34″ or 40″
  • 28” Bed Width, One-Piece Casting
  • Box Way Cross Slide on Carriage
  • H6 350 Turret with 3” Boring Bar Holder
  • Headstock Cooling System
  • Front Chip Pan and Rear Chip Conveyor
  • Fanuc 0iTF Controller with Manual Guide i, 10.4” LCD Monitor
  • No Tailstock

Optional Accessories

  • Optional V8 Turret Instead of H6 Turret
  • 23.5″ Steady Rest (min. 40″ Swing)
  • Additional 13.7″ Steady Rest
  • 9.8″ Follow Rest
  • Roller Bracket (2-Point Roller Rest)
  • 6″ Boring Bar Support w/ 4″ Sleeve
  • High Pressure Coolant System (16 Bar)
  • Fanuc Arbitrary Speed Threading
  • Manual, Hydraulic, & Air Chucks
Read more
Kingston CL58-Series
Kingston CL58-Series

Kingston’s CL-58 model builds upon our popular CL-38 by stepping up its power and capacity to handle larger and longer workpieces. This versatile front- and rear-chuck ready two-turret machine includes an upgraded front V8 hydraulic turret and rear H6 servo turret, 40 HP Motor, and wider 22″ 2 V-way bed for optimal cutting performance. Customize your CL-58 with a 7.3”or 10.1” bore and lengths from 80”— 240”.

Standard Features

  • Bore: 7.3″ or 10.1″
  • Swing: 35″
  • C.C.:  80″ — 240″
  • 30 HP / 40 HP (30min)
  • 22” Bed Width
  • V8 Hydraulic Front & H6 Servo Rear Turret
  • 9.25″ Steady Rest with Roller Jaws
  • Front & Rear Chuck Ready
  • Hydraulic & Manual Quill Movement
  • Rear Chip Conveyor
  • Fanuc 0iTF Controller with Manual Guide i, 10.4” LCD Monitor

Optional Accessories

  • V12 Live Tooling Turret & Mechanical Spindle Indexing
  • Front V8 Turret Only
  • 22.0″ Steady Rest
  • 15.9″ Steady Rest
  • Additional 9.25″ Steady Rest
  • 9.45″ Follow Rest
  • 4″, 5.5″, or 6″ Boring Bar Support
  • Higher Pressure Coolant Pump
  • Fanuc Arbitrary Speed Threading
  • Manual, Hydraulic, & Air Chucks
Read more
Kingston CX Lathe
Kingston CX Lathe

Kingston’s CX series heavy-duty precision lathes are built for cutting heavy and long workpieces for the energy, mining, textile, paper, and transportation industries. CX is available in a wide variety of configurations so you can customize your machine to your exact needs. Choose from a 4.06”, 7.09”, 10.1”, 12.5”, or 14.8” bore, 34” or 40” swing, and lengths from 80” – 280”. It is equipped with a V8 hydraulic turret and 5.45 HP and 9.5 HP AC servo motors that drive the X- and Z-Axis respectively. The headstock has 4 gearshifts controlled by hydraulics for greater torque and the main spindle has a three-point bearing support system – making it ideal for cutting heavy and extremely hard materials.

 

Standard Features

  • Bore: 4.06”, 7.09”, 10.1”, 12.5”, or 14.8”
  • Swing: 34” or 40”
  • C.C.: 80” – 280”
  • CX 4: 25 HP / 30 HP (30 min)
  • CX 7: 30 HP / 40 HP (30 min)
  • CX 10: 40 HP / 50 HP (30min)
  • CX 12 & CX 14: 40 HP / 50 HP (30 min)
  • 22” Bed Width
  • Box Way Cross Slide on Carriage
  • V8 Turret
  • 11.9” Steady Rest
  • Headstock Cooling System
  • Hydraulic & Manual Quill Movement
  • Rear Chip Conveyor with Cart
  • Fanuc 0iTF Controller with Manual

Guide i, 10.4” LCD Monitor

 

Optional Accessories

  • Cs-Axis with One-Degree Indexing
  • Live Tooling Turret
  • H4 Hydraulic Turret
  • Tool Block with T-Slot
  • Rear Turret
  • 6” Boring Bar Support
  • Siemens 828D with Shop Turn
  • Variable Speed Threading
Read more
Lucas WF 13R/15R Floor Type
Lucas WF 13R/15R Floor Type

WF 13 R/15 R CNC – Floor Type Horizontal Boring Machine

  • Fermat’s WF 13 floor mill incorporates the newest technological advances available on the machine tool market place.
  • A Floor type horizontal boring mill WF type is designed for precise and highly efficient coordinate boring, drilling, milling, and cutting of threads of big and heavy work pieces up from cast iron, cast steel and steel.
  • WF has a wide range of accessories can be added that considerably enhance the machine’s versatility.
  • The WF 13 is equipped with a powerful headstock capable of high axial forces for machining large or small work pieces alike. It is equipped with a live spindle with travel 730 mm and additional ram travel of 700 mm can also be incorporated.
  • The CNC rotary table is capable of precise circular interpolation.
  • Designed for even the most problematic machining situations due to its rigid design, and the precise machining capabilities.
  • The bed designed to absorb the maximum amount of vibrations that are created during cutting. It features heavy duty linear guideways.
  • The machine can be equipped with floor plates and/or rotary table(s) according to machining requirements.
Read more
Lucas WFC 10
Lucas WFC 10

Table Type Horizontal Boring Machine

WFC 10 CNC is a model specifically designed for the manufacturers that do not require machining of large work pieces.

  • The spindle diameter of this mill is 100 mm l 3.94″. It is also possible to order the machine with 110 mml 4.33″ spindle diameter.
  • This model is the smallest horizontal boring machine from Fermat‘s product line.
  • Suitable for machining of work pieces up to 3000 kg l 6614 lb.
  • Fixed column and perpendicularly moveable rotary table base
  • Combination of an operator friendly system and high cutting performance
  • Its low cost makes the WFC 10 CNC a very popular model with prospective customers.
  • large variety of machining accessories that can be utilized on the WFC 10 mode

 

Read more
Lucas WFT 11 Table Type
Lucas WFT 11 Table Type

WFT 11 CNC – Table Type Horizontal Boring Machine

  • With its 110 mm l 4.33″ spindle diameter the machine is able to cut deeply into workpieces without being too wide.
  • T-shaped axis structure and outstanding precision positioning rotary table.
  • All major machine components are made of grey cast iron and stabilized through annealing.
  • The rotary table is able to withstand loads up to 8 000 kg l 176 36 lb.
  • With the use of two pinions operating in a master-slave function, the table design has proven to be one of the most accurate tables in its class.
  • Use of special accessories such as the automatic tool changer, milling and facing heads fulfils the potential of this machine design
Read more
Lucas WFT 13 / 13R- Table Type
Lucas WFT 13 / 13R- Table Type

WFT 13R/ 13R CNC Table Type Horizontal Boring Machine

  • Universal, convenient and user-friendly machine tool for precise milling as well as coordinated boring and cutting of complicated work pieces up to 20 000 kg l 44 092 lb.
  • Powerful headstock, high axial forces, and the most precise table in its category.
  • The machine is available in a basic configuration, as well as accompanied by a variety of accessories and modifications.
  • WFT 13 CNC is the general favorite with exports to more than 40 countries worldwide.
  • A long history of production and superior quality components along with satisfied customers are the standards we reflect.
  • The WFT 13 R CNC is an innovative machine design due to the traveling ram.
  • Digitally controlled AC servomotors for all CNCs can control 5 or more axes position data of the machine at the same time.
  • The automatic pallet system has 2 to 5 pallet shuttle system.
Read more
Lucas WRF 130/150/160 Floor Type
Lucas WRF 130/150/160 Floor Type

WRF 130/150/160 CNC – Floor Type Horizontal Boring Machine

  • Newest concept and technology of floor-type horizontal boring mills currently on the global marketplace.
  • Its powerful headstock consists of a movable slide ram (Z-axis) and a moveable live spindle (W-axis).
  • Excellent circular interpolation accuracy and high precision of the additional CNC Rotary Table.
  • The column travels in the X-axis from 2400 to 28 100 mm l 94.49″ -1 106″
  • The headstock travel can be from 2 000 mm to 6 000mm l 78.74″ – 236.22″
  • The ram travel of: 900 mm to 1200 mm l 35.43″-74.24″.
  • We can tailor the machine to be suitable and specific for your production by the use of different and complimentary accessories.
  • A machine with a 1 550 mm ram stroke.
  • This machine comes equipped with either a stepless universal automatic milling head (UHAmi) or a 2.5°automatic milling head
  • Allows for heavy chip removal thanks to its powerful headstock and robust column.
  • WRF Mill can be outfitted with a rotary table of various sizes and load capacity or floor plates.
Read more
Lucas WRF 160 Heavy – Floor Type
Lucas WRF 160 Heavy – Floor Type

WRF 160 Heavy – Floor Type Horizontal Boring Machine

WRF 160 Heavy- is an extremely sturdy execution of our floor type boring mill representing the newest concept and technologies available for floor-type horizontal boring mills currently available on the global marketplace.

With excellent accuracy of circular interpolation and a very precise design of the additional CNC Rotary Table with a maximum load up to 80 000 kg l 176 370 lb., heavier work pieces can be clamped on floor plates or specially designed tables.

  • Designed with a Cross-Ribbed fabricated Column
  • A ram stroke of 1500 mm l 69.06″
  • A spindle stroke of 1 000 mm l 39.37”, and a 160 mm l 6.30″ spindle diameter
  • Two ball screws on the column with 100 mm l 3.94″diameter and a hydraulic cylinder for compensation of weight of the headstock.
  • The headstock is on 6 box ways with 2 linear guide ways on the left side to provide rigid and precise positioning.
  • The linear movement is performed on Hydrostatic ways.
  • The spread of one guide way is 450 mm l 17.71″ which allows substantial support and rigidity for the machine.
  • Fully integrated modular designs, including X-travel from 2 400 mm to 28 100 mm l 3.94″l 94.29″ -1 106″, Y-axis travel from 2 000 mm to 8 000 mm l 78.74″-314.96″
  • All variations of this model are available with a variety of attachments, tables and floor plates.
Read more
Lucas WRFT 130/150/160 – Table Type
Lucas WRFT 130/150/160 – Table Type

WRFT 130/150/160 CNC – Table Type Horizontal Boring Machine

WRFT 130/150/160 CNC is a universal boring and milling machine that allows efficient processing of large and heavy work pieces while utilizing high precision and quality of operation.

  • Largest table type horizontal borers produced by Fermat.
  • Powerful milling and drilling capacity, even at the top of Y-axis stroke
  • Higher precision than other machines available on the market.
  • Powerful headstock consists of a movable slide ram (V-axis) and a moveable live spindle (W-axis).
  • Additional optional accessories increases the number of controlled axes.
  • During the metal processing, the column of the machine provides a Z-axis movement and the work pieces are clamped on the rotary table that travels on the X-axis.
  • The standard configuration provides linear ways for all axis slides.
Read more
YCM NTC Series
YCM NTC Series

YCM NTC Series Turning Center

  • The 30° One-piece Slanted Bed Design, extends the space for chips removal.
  • Cross type ribs inside the base design provides the best rigidity.
  • Durable Meehanite casting is adopted to simulate the structural deformation of the body under various conditions, integrated with YCM hand scrapping skills for box guideways, which ensures the best accuracy and lifetime.
  • The X/Z-axis boxway design with wear-resistant pad strengthens rigidity and damping capacity for reducing vibration.
  • High Precision Spindle
  • Hole through draw bar for bars of Ø65mm (8″) & Ø51mm (6″)
  • The spindle is equipped with position encoder to detect speed and correct position.
  • With milling function spindle, the indexing accuracy is up to 0.001°.
  • High Performance Y-axis Complex Machining
  • Integrated Y-axis function with live tooling turret for X, Y, Z feeding, which is best for complex machining.
  • The orthogonal Y-axis is designed for maintaining machining accuracy.
  • Modularized Design for Tailstock and Sub Spindle
  • Except for standard manual tailstock, programmable tailstock and servo tailstock are available.

 

The whole machining line is completed in a temperature-controlled environment to maintain outstanding quality and accuracy.

Read more
Compressor Rentals
Compressor Rentals

Dominion Air has the equipment for your temporary compressed air needs.

From small jobs to large industrial operations, our diesel and electric rental fleet

Read more
Enshu GE Series
Enshu GE Series

GE460H

Ultra performance 400mm pallet, 40-taper traveling column horizontal machining center of the latest design. Totally expandable in the field in tools, pallet pools and systems. Easily grows with your company, add tools and pallets for endless possibilities.

GE480H

A 500mm pallet, 40-taper horizontal machining center that has been a trusted high performer. Offers large travels and a high-speed, heavy cutting spindle. Delivers ultra-performance in speed, thermal stability and unwavering reliability. Totally expandable in the field in both tools and pallet changer configurations. Easily grows with your company for endless possibilities.

GE580H

A high performance heavy cutting 500mm pallet 50-taper horizontal machining center. Features oversized spindle bearings and 13,000 RPM 40HP spindle for high metal removal in steels and aluminum. Equipped standard with chilled spindle and ballscrews, the JE80G delivers thermal stability and extended duty cycle.

GE590H

The GE90H is a 630mm 50-taper horizontal of the next generation design. It will offer a full range of ATC capacities and pallet system choices.

Read more
Retrofit EMX, KMX, SMX Kits
Retrofit EMX, KMX, SMX Kits
A great productivity investment

The more frugal you are, the more painful it should be to watch your people spend their time unproductively.  The cost of the ProtoTRAK CNC is trivial when compared to the cost of the person standing in front of the machine.  If you are going to keep and use the machine, retrofit it.

Even a machine that has some wear can be a good candidate for a retrofit. Ballscrews will be installed in the table and saddle and electronic machine tool error calibration and backlash compensation routines help maintain accuracy. If the head is in good condition, you probably have a useful machine.

We only retrofit small knee mills and our expertise is honed by twenty years’ experience and over 15,000 successful retrofits. The retrofit kit includes everything: motors, CNC, hardware, ballscrews, fasteners, even the cable ties. It is installed in your shop in about a day by a factory-trained technician. Custom kits for dozens of machines are available in either two or three-axis CNC.

You shouldn’t stop investing in productivity until all your machinists are working as efficiently as possible. Retrofitting can be a cost-effective way for you to reach that goal.

Read more
Takamaz USL-480
Takamaz USL-480

Inherited principle of space-saving design
In response to user requests for more tools made after the release of the USL-300 model, the USL-480 can be fitted with four standard tools. The remarkably slimmed-down USL-480 is only 480mm wide with the 160mm-long X-axis stroke maintained.

In pursuit of high-precision cutting
The built-in spindle with “zero-center design” lessens the relative displacement of the spindle unit and achieves greater cutting accuracy.

Shortened cycle time
The built-in spindle motor demonstrates a significant reduction in rise time (0 to 10,000min-1) to 1 second or less.* With the automatic loading mechanism installed, the time required for workpiece loading is only 4 seconds.

Read more
Takamaz XC-100
Takamaz XC-100

Only 1,150 mm machine width Ultra-Compact Design

The machine is a slim design with width of only 1,150mm and still comes with a 120mm stroke X-Axis and 230mm stroke Z-Axis. Even with a slim width, it is still designed with 450mm door opening. The machine accessories are placed in front or in accessible locations on the machine as emphasis to routine maintenance.

Read more
Takamaz XY-2000 Plus
Takamaz XY-2000 Plus

TAKAMAZ’s top compound machining center “XY-2000” has been redesigned. We have developed this specifically to provide larger work diameter, higher-level compound machining, and increased productivity, without changing the floor space. The first spindle is capable of bar work diameters up to a maximum of φ65mm※. Complex milling work is greatly considered with the combination of Y-axis control and rotary tools. This brings to fruition a high-functionality multi-machine capable of bar work and chuck work, expanding the capabilities in the area of lathe machining.

The maximum bar work diameter is φ51mm, standard, and an 8-inch chuck can be mounted on both spindles. In addition, for the first spindle only, it is possible to modify the spindle to handle bar work diameters up to φ65mm.

Along with increased spindle diameter, the spindle motor power is also increased. An AC18.5/15kW motor is mounted for the first spindle while an AC11/7.5kW motor for the second spindle is mounted, making it possible to perform at even higher level of compound machining, and then some.

Read more
TRAK 2op
TRAK 2op

The first portable CNC to focus on Second Operations.

Make dramatic improvements to your productivity by:

  • Reducing production cycle times
  • Improving labor utilization
  • Reducing planning and organization

 

Read more
TRAK DPMRX2
TRAK DPMRX2

TRAK DPMRX2

Like all TRAK DPMRX Series Bed Mills, the DPMRX2 features:

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

With These Important Differences:

  • 49″ x 9″ table size
  • 31.75″ X axis / 16″ Y axis / 25.5″ Z axis travel
  • 3 HP continuous spindle motor
  • R8 spindle taper
Read more
TRAK DPMRX3
TRAK DPMRX3

Like all TRAK DPMRX Series Bed Mills, the DPMRX3 features:

 

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually 

With These Important Differences:

  • 50″ x 10″ table size
  • 31.5″ X axis / 17″ Y axis / 25.81″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
Read more
TRAK DPMRX5
TRAK DPMRX5

Like all TRAK DPMRX Series Bed Mills, the DPMRX5 features:

 

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

With These Important Differences:

  • 50″ x 12″ table size
  • 40″ X axis / 20″ Y axis / 25.81″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
  • Almost 4″ quill diameter
  • Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
  • Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
Read more
TRAK DPMRX7
TRAK DPMRX7

Like all TRAK DPMRX Series Bed Mills, the DPMRX7 features:

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

 With These Important Differences:

  • 76″ x 14″ table size
  • 60″ X axis / 23″ Y axis / 24.25″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
  • 56″ quill diameter
  • Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
  • Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
  • 7,480 lbs. of machine mass
Read more
TRAK TRL 1630HS-RX
TRAK TRL 1630HS-RX

Like all TRAK RX Lathes, the TRL 1630HS-RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 16″ swing, 30″ between centers
  • Spindle through hole of 1.57″
  • 150-4000 rpm
  • At home in a lab or wherever smaller parts are made
Read more