checkmark

• A-ribbed base structure with multiple supporting points provides X-axis with the best straightness
• Work table fully supported by base provides perfect dynamic accuracy
• One piece high rigidity column offers low deformation, providing Y-axis with the best straightness
• Wide span saddle provides both horizontal and vertical support which decentralizes the load caused from head weight and spindle during machining
• Roller type linear guideways on both X/Y-axis provides low friction, non-backlash, high rigidity and high precision
• High damping boxway on Z-axis absorbs vibration, prolongs tool life and enhances surface precision
• Dual chip augers with conveyor offer efficient chip removal Simple plate metal design reduces chip accumulation

• Self-manufactured gearbox provides high torque for both vertical and horizontal machining
• High rigidity octagonal milling head design
• Quiet precision grounded bevel gear, adopts oil-mist lubrication to reduce heat
• Large diameter toothed clutches provide high machining stability, precision and rigidity
• 4 independent pull studs with high clamping force
• 90°angle head anti-drop safety mechanism
• Optional coolant through spindle (CTS) for both vertical/ 90°angle head
• Rotary head chamber design reduces space and provides rapid head change
• Automatic vertical / horizontal head change mechanism
• Reduce time for both fixture producing and workpiece installation, improving production efficiency
• Multi-face machining in one step increases machining efficiency and precision
• Vertical / Horizontal tool change system provides fast tool change, sensors and sequence scanning ensures tool change stability

• Self-manufactured gearbox provides high torque for both vertical and horizontal machining
• High rigidity octagonal milling head design
• Quiet precision grounded bevel gear, adopts oil-mist lubrication to reduce heat
• Large diameter toothed clutches provide high machining stability, precision and rigidity
• 4 independent pull studs with high clamping force
• 90°angle head anti-drop safety mechanism
• Optional coolant through spindle (CTS) for both vertical/ 90°angle head
• Rotary head chamber design reduces space and provides rapid head change
• Automatic vertical / horizontal head change mechanism
• Reduce time for both fixture producing and workpiece installation, improving production efficiency
• Multi-face machining in one step increases machining efficiency and precision
• Vertical / Horizontal tool change system provides fast tool change, sensors and sequence scanning ensures tool change stability

• Highly rigid box structure head design, effectively resists deformation and vibration during heavy cutting.
• Extra wide column base with boots design prevents the headstock from leaning forward.
• Work table fully supported by base provides perfect dynamic accuracy.
• The gear box is self-made which is powerful 2-step gear transmission as standard, with oil cooling lubrication that prevents temperature rise and noise.
• X-axis adopts direct gear drive that provides high torque, high transmission efficiency and low backlash.
• Z-axis head is boxway design that shows high rigidity and high damping, effectively avoids overhang, and vibration issues.
• Wide span saddle enhances stabilization. With rigid beam and columns configuration, it provides Y-axis with the best straightness.
• Y-axis and Z-axis adopt ball screw and flexible direct design,without blacklash and belt drive issues.

• The box-type design offers a ultra-wide base structure, high quality MEEHANITE® castings, oversize hardened & ground boxed ways to ensure the best machining performance by eliminating structural distortion and deformation under heavy machining conditions.
• The tailstock is supported by hardened and ground boxed ways that is structurally one-piece with the machine base, which ensures the best structural rigidity.
• The oversize quill supports heavy workpieces while maintaining machining accuracy.
• Optional live quill is ideal for high-speed, high production environment.
• Automatic Tool Length Measurement (opt.)
• Automatic Bar-feeder System (opt.)
• Automatic Parts Catcher (opt.) and Transfer System (opt.)
• Oversize hardened and ground box ways, ballscrew and bearings are essential requirements for enhancing the axial and radial cutting rigidity.
• High torque spindle motor provides the necessary power for roughing operation on tough material at low spindle speed.
• The GT series is ideal for high productivity turning and milling with exceptional speed, power, and capacity.
• Heavy-duty Spindle Design and Durable Hydraulic Chuck
• High quality chuck with powerful hydraulic system ensures machining rigidity and accuraacy.
• Pressure sensors are added to hydraulic system for monitoring clamping force of chuck, assuring the proper clamping of heavy parts.
• All spindles are strictly assembled in temperature controlled room, and proven through rigorous run-in test to assure the highest quality and reliability.The unique quill-type spindle cartridge designed for easy maintenance and repair if necessary.
• Reinforced ventilation is located throughout the spindle head to minimize thermal growth.
• Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours.
• High performance piston pump and radiation system are added to control the temperature of hydraulic oil, which minimize the thermal impact of hydraulic system.
• Isolated coolant tanks eliminate the effect of high coolant temperature after long running hours, which reduces structural deformation.
• The spindle motor sits outside of the machine base to isolate the heat generated from spindle motor after long operations.
• Low heat generated work lamp is installed to minimize temperature impact.

• The box-type design offers a ultra-wide base structure, high quality MEEHANITE® castings, oversize hardened & ground boxed ways to ensure the best machining performance by eliminating structural distortion and deformation under heavy machining conditions.
• The tailstock is supported by hardened and ground boxed ways that is structurally one-piece with the machine base, which ensures the best structural rigidity.
• The oversize quill supports heavy workpieces while maintaining machining accuracy.
• Optional live quill is ideal for high-speed, high production environment.
• Automatic Tool Length Measurement (opt.)
• Automatic Bar-feeder System (opt.)
• Automatic Parts Catcher (opt.) and Transfer System (opt.)
• Oversize hardened and ground box ways, ballscrew and bearings are essential requirements for enhancing the axial and radial cutting rigidity.
• High torque spindle motor provides the necessary power for roughing operation on tough material at low spindle speed.
• High quality chuck with powerful hydraulic system ensures machining rigidity and accuraacy.
• Pressure sensors are added to hydraulic system for monitoring clamping force of chuck, assuring the proper clamping of heavy parts.
• All spindles are strictly assembled in temperature controlled room, and proven through rigorous run-in test to assure the highest quality and reliability.The unique quill-type spindle cartridge designed for easy maintenance and repair if necessary.
• Oversize dual roller spindle bearings are used in both front and rear of the spindle to provide optimal spindle rigidity that is capable of handling 10mm cutting depth on hard material.
• The spindle headstock is symmetrically designed with radial configuration for the best heat reduction.
• Reinforced ventilation is located throughout the spindle head to minimize thermal growth.
• Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours.
• High performance piston pump and radiation system are added to control the temperature of hydraulic oil, which minimize the thermal impact of hydraulic system.
• Isolated coolant tanks eliminate the effect of high coolant temperature after long running hours, which reduces structural deformation.
• The spindle motor sits outside of the machine base to isolate the heat generated from spindle motor after long operations.
• Low heat generated work lamp is installed to minimize temperature impact.

• The box-type design offers a ultra-wide base structure, high quality MEEHANITE® castings, oversize hardened & ground boxed ways to ensure the best machining performance by eliminating structural distortion and deformation under heavy machining conditions.
• The tailstock is supported by hardened and ground boxed ways that is structurally one-piece with the machine base, which ensures the best structural rigidity.
• The oversize quill supports heavy workpieces while maintaining machining accuracy.
• Optional live quill is ideal for high-speed, high production environment.
• Automatic Tool Length Measurement (opt.)
• Automatic Bar-feeder System (opt.)
• Automatic Parts Catcher (opt.) and Transfer System (opt.)
• Oversize hardened and ground box ways, ballscrew and bearings are essential requirements for enhancing the axial and radial cutting rigidity.
• High torque spindle motor provides the necessary power for roughing operation on tough material at low spindle speed.
• High quality chuck with powerful hydraulic system ensures machining rigidity and accuraacy.
• Pressure sensors are added to hydraulic system for monitoring clamping force of chuck, assuring the proper clamping of heavy parts.
• All spindles are strictly assembled in temperature controlled room, and proven through rigorous run-in test to assure the highest quality and reliability.The unique quill-type spindle cartridge designed for easy maintenance and repair if necessary.
• The spindle headstock is symmetrically designed with radial configuration for the best heat reduction.
• Reinforced ventilation is located throughout the spindle head to minimize thermal growth.
• Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours.
• High performance piston pump and radiation system are added to control the temperature of hydraulic oil, which minimize the thermal impact of hydraulic system.
• Isolated coolant tanks eliminate the effect of high coolant temperature after long running hours, which reduces structural deformation.
• The spindle motor sits outside of the machine base to isolate the heat generated from spindle motor after long operations.
• Low heat generated work lamp is installed to minimize temperature impact.

The structural analysis and optimization of the SM machine model stabilizes the structure of the fuselage and provides the best high dynamic rigidity when the machine moves at high speed.

High-precision positioning and emphasis on positioning accuracy provide the best choice for precision machining of auto parts, small car molds, mold bases, mechanical hardware parts and so on.

• Large table clamping area
• Optimized positioning accuracy
• Y axis increases machining stroke
• 15m / min high-speed cutting feed
• Structural design of machine tools for high-torque high-speed cutting applications
• Torque output of full tooth spindle 1,163Nm (15 / 18.5kW)

NF series, 3-axis bridge-type CNC milling machining center, is one of the most attractive products of Vision Wide, for its linear guideways and Z axis box way, wide-ranging Y travel from 2,300 mm to 3,900 mm, and much wider choices of X travel from 2,200 mm to 10,200 mm.

Positioning accuracy could reach ±0.005/300 mm (JIS B6333).

NF satisfies various demands in mold surface cutting, angles cutting, 3D mold cutting and precise contour finishing, and it also completes automatic 5-face machining with special designed accessories such as tool center point compensation, auto multi-angle head attachments and auto tool change system.

• High rigidity box base, best span work table guideways, and wider load dimension ensured best level dynamic accuracy.
• Cross-section square beam enabled the centroid of the head close to the beam center to ensure heavy cutting ability.
• Fully auto 5-face machining capacity
  • Auto head change: 90º head / extension head / universal head
  • AVertical and horizontal auto tool change for 90º head.
  • A3-axis mechanical coordinates system

NFT series inherits Vision Wide’s high structural rigidity product design. The addition of a rotary table makes it easier for the engineering, hydraulic, tire mold, turbine blade and all cylindrical workpiece machining.

VB series, a CNC milling double column/ bridge machining center, applied box guide ways to display Vision Wide’s delicate scrapping and traditional machinery techniques. VB equipped extraordinary heavy duty cutting ability that met cutting requirements for mold base and components. Meanwhile, there were auto heads attachments for mold surface machining.

• Three axes movement is fully supported by Harden box way with low friction.
• Box ways was heat treated to HRC 50 hardness, and was precisely hand scrapping, then assemble and tune to best accuracy to ensure smooth and precise feeding performance.
• Box-shape with ribs design , main casting structure parts are made of Meehanite grade casting iron with stress- relief heat treatment provide durable, rigid support of the machine.
• Large size Guide ways are designed with optimal span to carry the table, box-shape bed with strong V-shape enforced ribs allows heavy work piece load.
• The best center-line layout of spindle system, spindle is close to the Y box way reduce the unbalanced cutting moment and offset of thermal expansion to minimum.

VF series, classic CNC milling double column/ bridge machining center in Vision Wide product lines, applied box guide ways to display Vision Wide’s delicate scrapping and traditional machinery techniques. VF equipped extraordinary heavy duty cutting ability that met cutting requirements for mold base and components. Meanwhile, there were auto heads attachments for mold surface machining.

Unique design of sloping beam enabled the center of Z axis close to the beam, and s

• Three axes movement is fully supported by Harden box way with low friction.
• Box ways was heat treated to HRC 50 hardness, and was precisely hand scrapping, then assemble and tune to best accuracy to ensure smooth and precise feeding performance.
• Box-shape with ribs design , main casting structure parts are made of Meehanite grade casting iron with stress- relief heat treatment provide durable, rigid support of the machine.
• Large size Guide ways are designed with optimal span to carry the table, box-shape bed with strong V-shape enforced ribs allows heavy work piece load.
• The best center-line layout of spindle system, spindle is close to the Y box way reduce the unbalanced cutting moment and offset of thermal expansion to minimum.