Home » checkmark » VISION WIDE SE Series

VISION WIDE SE Series

SE series, a 3-axis portal type CNC High Speed milling machine center released in 2017 , and it was designed particularly for mold processing, aluminum alloy machining and mass removal machining.

SE high speed machining center had a 50% improvement in productivity by excellent mechanism and structural performance.

  • Spindle speed reaches 24,000 rpm
  • 20 m/min of feed rate
  • Precise contour accuracy
  • Delicate surface roughness
  • Positioning accuracy P 0.007mm
  • Repeatability Ps 0.003 mm
  • Aluminum alloy chips removal rate 5,000 cc/ min
Category:
MODELSE-1612SE-2112SE-2612SE-1618SE-2118SE-2618SE-3118
X axis mm1600210026001600210026003100
Y axis mm1200120012001800180018001800
Z axis mm800/1,000 (columns add 200)800/1,000 (columns add 200)800/1,000 (columns add 200)800/1,000 (columns add 200)800/1,000 (columns add 200)800/1,000 (columns add 200)800/1,000 (columns add 200)
Table dimension mm1,500x1,0002,000x1,0002,500x1,0001,800x1,6002,300x1,6002,800x1,6003,300x1,600
Max. load kg800010000120008000100001200014000
Spindle power (cont./30 min rated) kW15/ 18.515/ 18.515/ 18.515/ 18.515/ 18.515/ 18.515/ 18.5
Spindle speed rpm15000150001500015000150001500015000
Spindle TaperBBT-40BBT-40BBT-40BBT-40BBT-40BBT-40BBT-40
Cutting feed rate mm/min1-20,0001-20,0001-20,0001-20,0001-20,0001-20,0001-20,000
Rapid feed rate(X/Y/Z)
m/min		24/24/2424/24/2424/24/2424/24/2424/24/2424/24/2424/24/24
Positioning accuracy(Refer to JIS B6333) mm±0.004 / Full travel±0.004 / Full travel±0.004 / Full travel±0.004 / Full travel±0.004 / Full travel±0.004 / Full travel±0.004 / Full travel
Repeatability(Refer to JIS B6333) mm±0.001±0.001±0.001±0.001±0.001±0.001±0.001
ATC tool magazine capacity pcs
Vertical Type		24 (20/32/40 Opt.)24 (20/32/40 Opt.)24 (20/32/40 Opt.)24 (20/32/40 Opt.)24 (20/32/40 Opt.)24 (20/32/40 Opt.)24 (20/32/40 Opt.)
Machine gross weight kg19500225002450020500235002550028000

Standard Accessory & FunctionOptional Accessory & Function
1. Fanuc 0i MF controller1. FANUC 31 iB Controller ; HEIDENHAIN TNC 620/640 Controller
2. Direct driven spindle 15,000 rpm (BBT-40)2. Built-in spindle20,000/ 24000 rpm(HSK-A63)；10,000/12,000 rpm(50#, HSK-A100)
3. Z travel 800mm3. Direct driven spindle 10,000/12,000 rpm (50#, HSK-A100)
4. Spindle cooler device4. Rapid traverse (X/Y/Z) 30 m/min
5. 24 Tools magazine with arm type ATC5. Z axis travel 1,000 mm
6. Centralized auto lubrication system6. Column higher 200 mm
7. Independent lubrication oil collector for 3 axes7. Spindle ring cutting coolant device (Built-in spindle excluded)
8. Air blast through spindle8. Coolant through spindle system 20/70 bar(Vertical spindle)
9. Wash gun and pneumatic interface9. Reserved interface for coolant through spindle system
10. Cutting fluid cooling system10. Oil skimmer
11. Fully enclosed sheet metal guard (with roof)11. Oil mist cooling device
12. Chip conveyor devices on table sides12. 20 tools magazine carousel type; 32/40 tools magazine arm type ATC
13. Caterpillar type chip conveyor / coolant tank13. Enclosed sheet metal guard (without roof)
14. Heat exchanger for electrical cabinet14. Worktable fluid flushing function
15. Working lamp15. Helically bladed screw conveyor on table sides
16. Operation cycle finish and alarm light16. Chip cart
17. Movable manual pulse generator17. Air conditioner for electrical cabinet
18. RJ45 interface18. Transformer
19. Footswitch for tool clamping19. Reserved interface for 4th axis
20. XYZ-axis Linear Scales20. Auto tool length measurement
21. Auto power off function21. Auto coordinate measurement
22. Spindle cutting load software protection22. Spindle load hardware protection
23. XYZ-axis travel hard limits protection23. CE Regulation
24. Foundation pads and bolts kits
25. Adjustment tool and tool kits
26. Z-axis retract function at power failure
27. Thermal compensation system of spindle
28. Technical manuals (operation, maintenance manual and circuit diagram)