Home » checkmark » YCM GT200B

YCM GT200B

  • The box-type design offers a ultra-wide base structure, high quality MEEHANITE® castings, oversize hardened & ground boxed ways to ensure the best machining performance by eliminating structural distortion and deformation under heavy machining conditions.
  • The tailstock is supported by hardened and ground boxed ways that is structurally one-piece with the machine base, which ensures the best structural rigidity.
  • The oversize quill supports heavy workpieces while maintaining machining accuracy.
  • Optional live quill is ideal for high-speed, high production environment.
  • Automatic Tool Length Measurement (opt.)
  • Automatic Bar-feeder System (opt.)
  • Automatic Parts Catcher (opt.) and Transfer System (opt.)
  • Oversize hardened and ground box ways, ballscrew and bearings are essential requirements for enhancing the axial and radial cutting rigidity.
  • High torque spindle motor provides the necessary power for roughing operation on tough material at low spindle speed.
  • High quality chuck with powerful hydraulic system ensures machining rigidity and accuracy.
  • Pressure sensors are added to hydraulic system for monitoring clamping force of chuck, assuring the proper clamping of heavy parts.
  • All spindles are strictly assembled in temperature controlled room, and proven through rigorous run-in test to assure the highest quality and reliability.The unique quill-type spindle cartridge designed for easy maintenance and repair if necessary.
  • Reinforced ventilation is located throughout the spindle head to minimize thermal growth.
  • Effective exhaust fans are installed on the spindle headstock to remove the heat generated from long running hours.
  • High performance piston pump and radiation system are added to control the temperature of hydraulic oil, which minimize the thermal impact of hydraulic system.
  • Isolated coolant tanks eliminate the effect of high coolant temperature after long running hours, which reduces structural deformation.
  • The spindle motor sits outside of the machine base to isolate the heat generated from spindle motor after long operations.
  • Low heat generated work lamp is installed to minimize temperature impact.
Category:
ModelGT-200B
Machining Capacity
Max. Turning Diameter (mm)ø260 
Max. Turning Length (mm)345
Main Spindle
Chuck Size8'' 
Spindle NoseA2-6 
Hole Through Spindle (mm)ø62 
Hole Through Draw Bar (mm)ø52 
Spindle Speed (rpm)4,500 
Sub Spindle
Travel
X-axis Travel (mm)150 (130 20) 
Z-axis Travel (mm)345 
Feedrate
"X - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min)24 / 1~10,000
"Z - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min)30 / 1~10,000
Motor
Main Spindle Motor (kW)(L) 3.7/7.5 (H) 5.5/7.5/9/11
Turret
Turret TypeServo Turret(Hydraulic Clamping)
Turret Capacity (Opt.)10 
Swing Over Turret (mm)ø490
Tailstock
Quill TaperMT-4
Quill Stroke (mm)260
Machine Weight kg4,210 

 

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.