TRAK DPMRX2
TRAK DPMRX2
Like all TRAK DPMRX Series Bed Mills, the DPMRX2 features:
- ProtoTRAK RMX CNC integrated into the machine at the factory
- TRAKing® — control of program run
- Solid ram moves along the column providing mass for heavy cuts
- Generous Z-axis CNC travel
- Strong and rigid
- Efficient for any job: manual, 2-axis CNC or 3-axis CNC
- Standard electronic head for programmable spindle speeds and tapping
- Precision ground ballscrews installed in the table, saddle and column
- Manual quill with integrated quill and ram encoders
- Wide way surfaces are hardened and ground, slideways are Turcite®coated
- Real handwheels so you can work manually
With These Important Differences:
- 49″ x 9″ table size
- 31.75″ X axis / 16″ Y axis / 25.5″ Z axis travel
- 3 HP continuous spindle motor
- R8 spindle taper
TRAK DPMRX3
Like all TRAK DPMRX Series Bed Mills, the DPMRX3 features:
- ProtoTRAK RMX CNC integrated into the machine at the factory
- TRAKing® — control of program run
- Solid ram moves along the column providing mass for heavy cuts
- Generous Z-axis CNC travel
- Strong and rigid
- Efficient for any job: manual, 2-axis CNC or 3-axis CNC
- Standard electronic head for programmable spindle speeds and tapping
- Precision ground ballscrews installed in the table, saddle and column
- Manual quill with integrated quill and ram encoders
- Wide way surfaces are hardened and ground, slideways are Turcite®coated
- Real handwheels so you can work manually
With These Important Differences:
- 50″ x 10″ table size
- 31.5″ X axis / 17″ Y axis / 25.81″ Z axis travel
- 5 HP continuous spindle motor
- 40 taper spindle
TRAK DPMRX5
Like all TRAK DPMRX Series Bed Mills, the DPMRX5 features:
- ProtoTRAK RMX CNC integrated into the machine at the factory
- TRAKing® — control of program run
- Solid ram moves along the column providing mass for heavy cuts
- Generous Z-axis CNC travel
- Strong and rigid
- Efficient for any job: manual, 2-axis CNC or 3-axis CNC
- Standard electronic head for programmable spindle speeds and tapping
- Precision ground ballscrews installed in the table, saddle and column
- Manual quill with integrated quill and ram encoders
- Wide way surfaces are hardened and ground, slideways are Turcite®coated
- Real handwheels so you can work manually
With These Important Differences:
- 50″ x 12″ table size
- 40″ X axis / 20″ Y axis / 25.81″ Z axis travel
- 5 HP continuous spindle motor
- 40 taper spindle
- Almost 4″ quill diameter
- Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
- Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
TRAK DPMRX7
Like all TRAK DPMRX Series Bed Mills, the DPMRX7 features:
- ProtoTRAK RMX CNC integrated into the machine at the factory
- TRAKing® — control of program run
- Solid ram moves along the column providing mass for heavy cuts
- Generous Z-axis CNC travel
- Strong and rigid
- Efficient for any job: manual, 2-axis CNC or 3-axis CNC
- Standard electronic head for programmable spindle speeds and tapping
- Precision ground ballscrews installed in the table, saddle and column
- Manual quill with integrated quill and ram encoders
- Wide way surfaces are hardened and ground, slideways are Turcite®coated
- Real handwheels so you can work manually
With These Important Differences:
- 76″ x 14″ table size
- 60″ X axis / 23″ Y axis / 24.25″ Z axis travel
- 5 HP continuous spindle motor
- 40 taper spindle
- 56″ quill diameter
- Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
- Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
- 7,480 lbs. of machine mass