- Table size – 76″ x 14″
- T-slots (number x width x pitch) – 4 x .63″ x 2.5″
- Travel (X, Y, Z axis)* – 60″ x 23″ x 24.25″
- Quill diameter – 4.56″
- Maximum quill travel – 5.5″
- Spindle taper – 40 Taper
- Spindle speed range – RPM 40 – 600, 300 – 5000
- Spindle center to column face – 24″
- Head swivel (side to side) – +30° CW and -90° CCW **
- Quill feeds per revolution of spindle – 0.0015/0.003/0.006″
- Spindle motor HP (vari-speed head) – 7.5 HP
- Power requirements – machine/control – 200-240V, 3P, 42A
- Maximum weight of workpiece – 2200 lbs.
- Height of table from bottom of bed – 38.75″
TRAK DPMRX7
Like all TRAK DPMRX Series Bed Mills, the DPMRX7 features:
- ProtoTRAK RMX CNC integrated into the machine at the factory
- TRAKing® — control of program run
- Solid ram moves along the column providing mass for heavy cuts
- Generous Z-axis CNC travel
- Strong and rigid
- Efficient for any job: manual, 2-axis CNC or 3-axis CNC
- Standard electronic head for programmable spindle speeds and tapping
- Precision ground ballscrews installed in the table, saddle and column
- Manual quill with integrated quill and ram encoders
- Wide way surfaces are hardened and ground, slideways are Turcite®coated
- Real handwheels so you can work manually
With These Important Differences:
- 76″ x 14″ table size
- 60″ X axis / 23″ Y axis / 24.25″ Z axis travel
- 5 HP continuous spindle motor
- 40 taper spindle
- 56″ quill diameter
- Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
- Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
- 7,480 lbs. of machine mass