TRAK DPMRX3

Like all TRAK DPMRX Series Bed Mills, the DPMRX3 features:

 

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually 

With These Important Differences:

  • 50″ x 10″ table size
  • 31.5″ X axis / 17″ Y axis / 25.81″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
Categories: , ,
  • Table size – 50″ x 10″
  • T-slots (number x width x pitch) – 3 x .63″ x 2.48″
  • Travel (X, Y, Z axis)* – 31.5″ x 17″ x 25.81″
  • Quill diameter – 3 15/16″
  • Maximum quill travel – 5″
  • Spindle taper – 40 Taper
  • Spindle speed range – RPM 40 – 600, 300 – 5000
  • Spindle center to column face – 20.5″
  • Head swivel (side to side) – +/- 90°
  • Quill feeds per revolution of spindle – 0.0015/0.003/0.006″
  • Spindle motor HP (vari-speed head) – 5 HP
  • Power requirements – machine/control – 200-240V, 3P, 35A
  • Maximum weight of workpiece – 1320 lbs.
  • Height of table from bottom of bed – 36.75″
  • Max spindle nose to table – 25.81″
  • Min height – 87.5″
  • Max height – 96.75″
  • Width of machine including table – 73.5″
  • Length with electrical door closed – 76.63″
  • Length with electrical door open – 96.63″
  • Overall width incl full table traverse – 102.25″
  • Footprint of machine – 24″ x 43.31″
  • Weight net / shipping lbs. – 4100 / 4400
  • Rapid traverse X, Y
    250 IPM on X, Y and Z with Mechanical Handwheels
    400 IPM on X and Y
    250 IPM on Z with electronic handwheels
  • Coolant capacity – 10 gallons
  • Drilling max capacity in mild steel – 1″ dia.

    •