Chevalier FSG-2040 / 2060ADIII Fully Automatic Precision Surface Grinder
PLC touch screen 3 axes fully automatic surface and plunge grinding system
“New” 8” TFT high resolution 65536 color control to ensure ease of operation
High precision cartridge type spindle equipped with 4 pieces of class 7 angular contact ball bearings, suitable for heavy duty grinding.
Wheel head will raise up to end, start and reference position
Table parks at left or right side after cycle is completed
I/O diagnosis & alarm display
To achieve better accuracy, the number of free passes between down-feeds can be preset depending on work piece material.
Chevalier FSG-2440 / 2460 / 2480 / 24120ADS Fully Automatic Precision Surface Grinder
Over wheel-parallel dressing with automatic compensation system helps to reduce cycle time and minimize operator involvement.
PLC touch screen 3 axes fully automatic surface and plunge grinding system
“New” 8” TFT high resolution 65536 color control to ensure ease of operation
High precision cartridge type spindle equipped with 4 pieces of class 7 angular contact ball bearings, suitable for heavy duty grinding.
Wheel head will raise up to end, start and reference position
Table parks at left or right side after cycle is completed
I/O diagnosis & alarm display
To achieve better accuracy, the number of free passes between down-feeds can be preset depending on work piece material.
Chevalier FSG-1224 / 1632 / 1640ADIV Fully Automatic Precision Surface Grinder
PLC touch screen 3 axes fully automatic surface and plunge grinding system
10.4” TFT high resolution 65536 color control to ensure ease of operation
High precision cartridge type spindle equipped with 4 pieces of class 7 angular contact ball bearings, suitable for heavy duty grinding Remove period
Wheel head will raise up to end, start and reference positions
Table parks at left or right side after cycle is completed
I/O diagnosis & alarm display
To achieve better accuracy, the number of free passes between down-feeds can be preset depending on work piece material Remove period
Chevalier FSG-618M Manual Surface Grinders (M Series)
All essential castings are mode of high grade Meehanite ®cast iron that is stress relieved through annealing to eliminate internal stress.
With the greatest stiffness and stability of the castings, this machine is suitable for both precision surface grinding and form grinding.
The interlock between electrical cabinet door and power supply is established to ensure safe operation.
The spring loaded type table travel stops will dampen the over travel caused by abnormal operations.
Saddle travels on Turcite-B coated and hand scraped double V guideways.
Chevalier FSG-618SP / 818SP Manual Surface Grinders (SP Series)
Table traverses on linear ball bearings and D2 hardened & ground guideways.
Reinforced ribbed column with hardened & ground guide way system.
Elevating & cross-feed leadscrews are hardened & ground.
Saddle travels on Turcite-B coated and hand scraped double V guideways.
Vertical hand wheel at waist level
Permanently lubricated and sealed cartridge-type spindle
Uses two pairs of class 7 (P4) angular contact ball bearings
2HP dynamically balanced spindle motor.
Automatic lubrication system
Meehanite® cast iron
A mirror surface can be accomplished on these machines accurately and efficiently
Chevalier FVGC-II Vertical Grinders
FANUC OiMD Control
High pressure coolant with paper filter system
Shielded 24-station arm type tool changer prevents tooling contamination
Heat exchanger for electrical cabinet
Specially sealed and triple protected 3-Axis balls crews
Double protection on 3 axis guideways.
Shielded 24-station arm type tool changer prevents tooling contamination
Powerful auto flushing system
Chevalier FVG-4040DC Vertical Grinders
No overhang caused by chuck and workpiece, accuracy and surface finish is better than universal grinder.
Y-axis can swivel ±22o30′, head stock also can rotate ±22o30′, suitable for various grinding application.
Counter weight balance for elevation mechanism, providing smooth and high accuracy micro down-feed accuracy.
Linear way design for all slide ways, providing highest positioning accuracy and low vibration low chattering dynamic grinding. Great choice for high repeatability grinding accuracy.
Easy holding for irregular shape workpiece.
Chevalier CGP-816 / 1224 / 1240 / 1260 / 1280 / 1624 / 1640 / 1660 / 1680 Cylindrical Grinders
Friction-free hydrostatic spindle bearing for precision grinding
Precision ball screw driven by AC digital servo motor
Mitsubishi PLC control with touch screen operation
High-grade Nichrome steel SNCM-220 wheel head
Table travels on one V, one flat guideway
Machine castings are fully ribbed and are made of dense, high-grade Meehanite cast iron
Tailstock center is capable of absorbing thermal expansion of work piece
Rough grinding, fine grinding and spark-out in one automated cycle.
Wheelhead retracts to park unload point after grinding cycle is completed
Chevalier FDG-700 Double-Sided Fine Grinders
High-precision digitally controlled pneumatic system automatically adjusts to set pressure
High-precision contact measuring system, grinding height control and dressing monitoring
Over-stroke protection measuring system
10.4″ touch-screen monitor, user-friendly with intuitive operations
Compliant with freely programmable process parameters for excellent machining results
Easy to operate, set-up and maintain resulting in labor cost savings
Multiple processing conditions: grinding mode, coolant system control and upper disk control
Optional multi-language support
Niigata HN50E HN50E Heavy Duty Boxway Horizontal Machining Center (HMC)
Heavy duty boxway machining center features solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN63E HN63E Heavy Duty Boxway Horizontal Machining Center (HMC)
Heavy duty boxway machining center features solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN63E-TI HN63E-Ti Heavy Duty Boxway Horizontal Machining Center (HMC) Designed for Machining Titanium and Other Hard Machining Materials
Heavy duty boxway machining center designed for ultra low frequency machining.
Solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN800V HN800V Heavy Duty Boxway Horizontal Machining Center (HMC)
Heavy duty boxway machining center with V-shaped guideways, hardened and ground.
Precision straightness of motion, elimination of roll, pitch and yaw.
Hand scraped squareness and perpendicularity for increased volumetric accuracy.
Rapid speed of 50m/min or 1968 ipm.
Solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN100D-II HN100D-II Heavy Duty Boxway Horizontal Machining Center
Heavy duty boxway machining center with solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN800V-Ti HN800V-Ti Heavy Duty Boxway Machining Center (HMC) Designed for Machining Titanium and Other Hard Machining Materials
Heavy duty boxway machining center designed for ultra low frequency machining.
Hardened and ground V-shaped guideways.
Precision straightness of motion, elimination of roll, pitch and yaw.
Hand scraped squareness and perpendicularity for increased volumetric accuracy.
Rapid speed of 50m/min or 1968 ipm.
Solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN100D-II-Ti HN100D-II-Ti Heavy Duty Boxway Machining Center Designed for Machining Titanium and Other Hard Machining Materials
Heavy duty boxway machining center designed for ultra low frequency machining.
Solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN130D HN130D Heavy Duty Boxway Horizontal Machining Center
Heavy duty boxway machining center features solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata HN1600D HN1600D Heavy Duty Boxway Machining Center
Heavy duty boxway machining center features solid meehanite cast iron machine frame.
Outstanding stability, damping through extensive ribbing of machine frame.
Wide induction hardened boxways for long-term accuracy and rigidity.
All axes hand scrapped by highly experienced technicians.
Gear driven spindles that general extremely high torque.
Niigata’s mean workzone is the most generous in the industry.
Niigata SPN503 SPN503 High-Speed Linear Roller Guide Horizontal Machining Center
High-speed linear horizontal machining center features high torque & speed #50 taper spindle.
Our Box in box (double box structure) achieves long-term volumetric accuracy.
Solid base and simple 3-point leveling.
Ultra rigid and high load type roller guideway system for X,Y,Z axis.
Unique synchronous swing motion (SSM) reduces ATC time.
Niigata SPN701 SPN701 High-Speed Linear Roller Guide Horizontal Machining Center
High-speed linear roller guide horizontal machining center features excellent machine accuracy and stability with a high torque/speed #50 taper spindle.
Box in box (double box structure) achieves long-term volumetric accuracy.
Solid base and simple 3-point leveling.
Ultra rigid and high load type roller guideway system for X,Y,Z axis
Unique synchronous swing motion (SSM) reduces ATC time.
Niigata SPN901 SPN901 High-Speed Linear Roller Guide Horizontal Machining Center
High-speed linear roller guide horizontal machining center features excellent machine accuracy and stability with a high torque/speed #50 taper spindle.
Box in box (double box structure) achieves long-term volumetric accuracy.
Solid base and simple 3-point leveling.
Ultra rigid and high load type roller guideway system.
Unique synchronous swing motion (SSM) reduces ATC time.
Niigata N7 N7 High-Speed Linear HMC with 15 Inch Color LCD
High-speed linear horizontal machining center with 15 inch color LCD.
Box in box (double box structure) achieves long-term volumetric accuracy.
Solid base and simple 3-point leveling.
Excellent machine accuracy stability.
Ultra rigid and high load roller guideway system.
Niigata HN800-S HN800-S Boxway Horizontal Machining Center
Hybrid boxway horizontal machining center with a combination of linear roller guides on X and Z axis and boxway guide system on Y axis.
Speed, stability, vibration dampening are achieved at 41m/min or 1614 ipm.
Heavy duty, high torque geared head spindle is standard.
Wide range of spindle choices – standard, quill / bar, extreme high torque and 15,000 rpm 60 hp.
Niigata HN1000S HN1000S Boxway Horizontal Machining Center
Hybrid boxway horizontal machining center with a combination of linear roller guides on X and Z axis and boxway guide system on Y axis.
Speed, stability, vibration dampening are achieved at 40m/min or 1574 ipm.
Heavy duty, high torque geared head spindle is standard.
Wide range of spindle choices – standard, quill / bar, exreme high torque and 15,000 rpm 60 hp.
Niigata HN1250S HN1250S Boxway Horizontal Machining Center
Hybrid boxway horizontal machining center with a combination of linear roller guides on X and Z axis and boxway guide system on Y axis.
Speed, stability, vibration dampening are achieved at 40m/min or 1574 ipm.
Heavy duty, high torque geared head spindle is standard.
Wide range of spindle choices – standard, quill / bar, exreme high torque and 15,000 rpm 60 hp.
Niigata HN1600S HN1600S Boxway Horizontal Machining Center
Hybrid boxway horizontal machining center features largest work envelope in its class.
Hybrid machining with a combination of linear roller guides on X and Z axis and boxway guide system on Y axis.
Speed, stability, vibration dampening are achieved at 40m/min or 1574 ipm.
Heavy duty, high torque geared head spindle is standard.
Wide range of spindle choices – standard, quill / bar, exreme high torque and 15,000 rpm 60 hp.
Niigata HN50E-5X HN50E-5X 5-Axis Horizontal Machining Center (5-Axis HMC)
This 5-axis horizontal machining center features a rigid machine body.
Machine base of HN63E – a rigid boxway machine with excellent stability and great damping characteristics.
High torque spindle.
Rigid trunnion table for low frequency machining.
High load roller BRG and double-lead worm gear for A and B axes, high torque drive.
Perfect for machining titanium and other hard machining materials.
A variety of 5-axis machining support software.
Niigata HN63E-5X HN63E-5X 5-Axis Horizontal Machining Center (5-Axis HMC)
This 5-axis horizontal machining center features a rigid machine body.
Machine base of HN63E – a rigid boxway machine with excellent stability and great damping characteristics.
High torque spindle.
Rigid trunnion table and low frequency machining.
High load roller BRG and double-lead worm gear for A and B axes, high torque drive.
Perfect for machining titanium and other hard machining materials.
A variety of 5-axis machining support software.
Niigata HN100D-II-FC HN100D-II-FC Multi-Tasking Horizontal Machining Center (HMC)
Multi-tasking horizontal machining center performs turning, facing, boring and milling, all in one machine and completely programmable.
Rigid & solid machine body.
Outstanding stability & vibration damping by thick machine base.
Long-term accuracy and rigidity by wide induction hardened boxways that are skillfully scraped by Niigata.
Largest work zone in its class.
Long stroke.
Wide machining range.
Standard facing head or twin facing tool head.
Niigata HN130D-FC HN130D-FC Multi-Tasking HMC with Largest Work Zone
Multi-tasking horizontal machining center (HMC) with largest work zone performs turning, facing, boring and milling, all in one machine and completely programmable.
Outstanding stability & vibration damping by thick machine base.
Long-term accuracy and rigidity by wide induction hardened boxways that are skillfully scraped by Niigata.
Largest work zone in its class.
Long stroke.
Wide machining range.
Standard facing head or twin facing tool head.