| Model | TC36 |
|---|---|
| Machining Capacity | |
| Max. Turning Diameter (mm) | ø590 |
| Max. Turning Length (mm) | 1,189 |
| Main Spindle | |
| Chuck Size | 12 |
| Spindle Nose | A2-8 |
| Hole Through Spindle (mm) | ø105 |
| Hole Through Draw Bar (mm) | ø93 |
| Spindle Speed (rpm) | 12"L: 7~180~719 H: 30~751~2,500 |
| Sub Spindle | |
| Travel | |
| X-axis Travel (mm) | 310 |
| Z-axis Travel (mm) | 1,250 |
| Feedrate | |
| "X - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min) | 15 / 1~5,000 |
| "Z - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min) | 20 / 1~5,000 |
| Motor | |
| Main Spindle Motor (kW) | 22 / 26 |
| Turret | |
| Turret Type | Hydraulic Turret |
| Turret Capacity (Opt.) | 12 (10 / 8) |
| Swing Over Turret (mm) | ø640 |
| Tailstock | |
| Quill Taper | MT-4 |
| Quill Stroke (mm) | 1,080 |
| Machine Weight kg | 7,000 |
YCM TC36
- The 12-station turret index is done by absolute detection, and no tool selection mistake is caused.
- The powerful turret of large diameter curvic coupling offers high precision and high rigidity in cutting performance.
- The spindle is equipped with high precision angular ball bearing and NN series bearing witch provides high precision and rigidity working condition.
- The inner diameter of the bearing is ø150mm ø5.91″, and ø105mm ø4.13″ of the spindle through hole. ø93mm ø3.66″ of the drawbar through hole adapts large diameter bar stock jobs.
- The powerful spindle with built-in gears provides various speed transmissions. The max. output of torque reaches 140kgf-m 1,013 lb-ft, with max. spindle speed of 2,500rpm.
- This machine is equipped with high precision ball screws and connected with motor directly. The fixing design supports both ends; the design of pre-tensioned ball screws provides high rigidity, high precision, and low heat effect.
- The stand alone oil tank ensures the machining precision will not be affected by heat. It is also convenient and efficient for cleaning and maintaining the oil tank.
- Hydraulic gauges, control values of chuck and tail stock, and the central lubrication system are located at the front side for easy operation and maintenance.
- Using “M” code commands the quill stroke of the programmable tailstock can be hooked with a hydraulic hook to the saddle carriage and slide along the Z-axis stroke. Tailstock with live quill is standard.
- From the window of the safety guard, operator can see through the engaged job, and shield from the cutting chips and coolant mist.