YCM TC16LB – Dominion Air & Machinery

YCM TC16LB

45°one-piece slant bed design extends chips removal space.
The independent coolant tank isolates the base from heat exposure.
A special design of the coolant tank prevents the chips from flowing into the machine.
The design of main/sub coolant tank simplifies the cleaning of chip conveyor.
The filter and sub coolant tank can be drawn out separately for easy maintenance.
6″ (Hole through Draw Bar ø52mm); 8″ (Hole through Draw Bar ø66mm)
With low resistance and low friction, the Linear Guideway Design on X/Z Axis prolongs machine life.
One-piece 45° Slant bed design extends the space for removing chips.
MEEHANITE® casting with high damping capacity
Quick and reliable servo-driven turret is hydraulic clamping
Extra large and high precision clutch provides high positioning and repeatability accuracy.
Diverse choices of tailstock and turning length
Diverse choices of tailstock and turning length
High efficiency and low power loss plunger pump adopted
Large diameter and high precision NN series roller bearings, equipped with angular contact ball bearings, provides the best radial and axial rigidity during machining.
Symmetric head design dissipates heat, and reduces thermal deformation.
Easy to adjust and repair.
With low resistance and low friction, the linear guideway design on X/Z axis achieves flawless positioning accuracy.
The axial pretension design on ball screws reduces thermal displacement.
Reduce manual loading/unloading time and achieve 24-hour production, improving the factory utilization.
Save labor cost, improve productivity and lower defection rate.
Reduce changeover time to meet the demand of low volume production of diversified parts.
Flexible modular system and easy to be installed based on various product line.

Model	TC16LB

Machining Capacity
Max. Turning Diameter (mm)	ø260
Max. Turning Length (mm)	600

Main Spindle
Chuck Size	8''
Spindle Nose	A2-6
Hole Through Spindle (mm)	ø77
Hole Through Draw Bar (mm)	ø66
Spindle Speed (rpm)	4,500

Sub Spindle

Travel
X-axis Travel (mm)	150
Z-axis Travel (mm)	600

Feedrate
"X - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min)	24 / 1~10,000
"Z - axis Rapid Feedrate / Cutting Feedrate" (m/min / mm/min)	30 / 1~10,000

Motor
Main Spindle Motor (kW)	11 / 15

Turret
Turret Type	Servo Turret (Hydraulic Clamping)
Turret Capacity (Opt.)	10T
Swing Over Turret (mm)	ø490

Tailstock
Quill Taper	MT-4
Quill Stroke (mm)	500

Machine Weight kg	3,700

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.