» » » TRAK TRL 30120RX

TRAK TRL 30120RX

Like all TRAK RX Lathes, the TRL 30120RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • Gap bed lathe with 43.5″ swing over 15.5″ gap
  • 118″ between centers with 121″ maximum cutting length
  • Large 6.30″ spindle through hole
  • 17″ of cross slide travel
  • 30 HP continuous spindle motor
  • Interface for rear chuck
  • High (aluminum) and low (steel) speed range settings
  • Coolant pump – standard equipment
  • 3 work lights – standard equipment

Capacity      

  • Height of Centers – 17″
  • Distance Between Centers – 118″
  • Swing over bed – 34″
  • Swing Over Saddle Wings – 34″
  • Swing Over Cross Slide – 21.2″
  • Cross Slide Travel – 20.5″
  • Tool Section Max. – 1.5″
  • Coolant Tank Capacity – 48 gal.
  • Oil Pump – Way Lubrication – 2 Liter
  • Headstock Lubrication – 10 gal.

Rapid Speeds

  • 400 ipm on Z Axis
  • 200 ipm on X Axis

Bed   

  • Width of Bed – 19.69″
  • Height of Bed – 34.44″

Headstock   

  • Spindle Nose – A2-11
  • Spindle Through Hole – 6.30″
  • Spindle Taper – Non MT taper
  • Taper In Reduction Sleeve – MT#6
  • Spindle Dia. At Front Bearing – 7.87″
  • Number of Bearings – 2
  • Speeds/Speed Ranges – 2
  • Spindle Speed Range RPM – 20-415, 40-1,300
  • Spindle ID Thread (end of spindle) – M185 x 3.0

Tailstock      

  • Quill Travel – 8″
  • Quill Diameter – 4.13″
  • Quill Taper Hole – MT#6

Spindle Motor         

  • Horsepower – 30 HP

Machine Power Requirements  

  • Voltage – 480V
  • Amps, Full Load – 62A
  • Phase/Hz – Mar-60

Dimensions

  • Net (L x W x H), lbs. – 212.6″ x 86.61″ x 79.53″ – 18,920 lbs.
  • Shipping (L x W x H), lbs. – 222.44″ x 90.55″ x 110.23″ – 19,270 lbs.

Other 

  • Coolant Pump Motor HP – 1/2 HP
  • Spindle Motor Brake – Dynamic
  • Way Surface Hardness – 480-560 HB
  • Headstock Lubrication – Oil Bath

Options        

  • Tooling Kit – 1-1/4″
  • Chuck – 20″, A2-11
  • 5C Collet Closer – n/a
  • Turret Option – n/a