» » » TRAK TRL 2470RX

TRAK TRL 2470RX

Like all TRAK RX Lathes, the TRL 2470RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 24″ swing, 70″ between centers
  • Generous 4.09″ spindle through hole
  • 15 HP continuous spindle motor
  • Geared head for good performance at low speeds
  • Tapered roller bearings
  • High (aluminum) and low (steel) speed range settings

Capacity      

  • Height of Centers – 12″
  • Distance Between Centers – 70″
  • Swing over bed – 24″
  • Swing Over Saddle Wings – 24″
  • Swing Over Cross Slide – 14.5″
  • Cross Slide Travel – 12.5″
  • Tool Section Max. – 1″
  • Coolant Tank Capacity – 15 gal.
  • Oil Pump – Way Lubrication – 2 Liter

Headstock Lubrication

  • 3 gal.
  • 3 gal. w/oil cooler option

Rapid Speeds

  • 400 ipm on Z Axis
  • 200 ipm on X Axis

Bed   

  • Width of Bed 57″
  • Height of Bed – 15″

Headstock   

  • Spindle Nose – D1-8
  • Spindle Through Hole – 4.09″
  • Spindle Taper – MT#8
  • Taper In Reduction Sleeve – MT#5
  • Spindle Dia. At Front Bearing – 5.51″
  • Number of Bearings – 2
  • Speeds/Speed Ranges – 2
  • Spindle Speed Range RPM – 40-670, 100-1,800
  • Spindle ID Thread (end of spindle) – n/a

Tailstock      

  • Quill Travel – 8.5″
  • Quill Diameter – 3.5″
  • Quill Taper Hole – MT#5

Spindle Motor         

  • Horsepower – 15 HP

Machine Power Requirements  

  • Voltage – 200V to 240V
  • Amps, Full Load – 75A
  • Phase/Hz – Mar-60

Dimensions

  • Net (L x W x H), lbs. – 129″ x 84″ x 79″ – 6,500 lbs.
  • Shipping (L x W x H), lbs. – 134″ x 65″ x 79″ – 6,900 lbs.

Other 

  • Coolant Pump Motor HP – 1/8 HP
  • Spindle Motor Brake – Dynamic
  • Way Surface Hardness – n/a
  • Headstock Lubrication – Oil Bath

Options        

  • Tooling Kit – 1″
  • Chuck – 12″, D1-8
  • 5C Collet Closer – n/a

Turret Option          

  • 1″, 8 Position
  • 1″, 4 Position