Capacity
- Height of Centers – 8″
- Distance Between Centers 30″
- Swing over bed 16″
- Swing Over Saddle Wings 16″
- Swing Over Cross Slide 6″
- Cross Slide Travel 5″
- Tool Section Max. 3/4″
- Coolant Tank Capacity 8 gal.
- Oil Pump – Way Lubrication 2 Liter
- Headstock Lubrication 5 gal.
Rapid Speeds
- 400 ipm on Z Axis
- 200 ipm on X Axis
Bed
- Width of Bed 6″
- Height of Bed 6″
Headstock
- Spindle Nose D1-6
- Spindle Through Hole 12″
- Spindle Taper MT#6
- Taper In Reduction Sleeve n/a
- Spindle Dia. At Front Bearing 15″
- Number of Bearings 2
- Speeds/Speed Ranges 1
- Spindle Speed Range RPM 150-2,500
- Spindle ID Thread (end of spindle) M56 x 2MM Pitch
Tailstock
- Quill Travel 75″
- Quill Diameter 36″
- Quill Taper Hole MT#4
Spindle Motor
- Horsepower 5 HP
Machine Power Requirements
- Voltage 200V to 240V
- Amps, Full Load 44A
- Phase/Hz Mar-60
Dimensions
- Net (L x W x H), lbs. 82″ x 45″ x 72″, 2,750 lbs.
- Shipping (L x W x H), lbs. 87″ x 45″ x 70″, 3,420 lbs.
Other
- Coolant Pump Motor HP 1/8 HP
- Spindle Motor Brake Dynamic
- Way Surface Hardness 400-450 HB
- Headstock Lubrication Oil Bath
Options
- Tooling Kit 3/4″
- Chuck 8″, D1-6
- 5C Collet Closer D1-6
- Turret Option
3/4″, 8 Position
3/4″, 4 Position