Capacity
- Height of Centers – 8″
- Distance Between Centers – 30″
- Swing over bed – 16″
- Swing Over Saddle Wings – 16″
- Swing Over Cross Slide – 8.6″
- Cross Slide Travel – 8.5″
- Tool Section Max. – 3/4″
- Coolant Tank Capacity – 8 gal.
- Oil Pump – Way Lubrication – 2 Liter
- Headstock Lubrication – 1.5 gal.
Rapid Speeds
- 400 ipm on Z Axis
- 200 ipm on X Axis
Bed
- Width of Bed -12.6″
- Height of Bed – 12.6″
Headstock
- Spindle Nose – A2-4
- Spindle Through Hole – 1.57″
- Spindle Taper – MT#5
- Taper In Reduction Sleeve – n/a
- Spindle Dia. At Front Bearing – 2.56″
- Number of Bearings – 5
- Speeds/Speed Ranges – 1
- Spindle Speed Range RPM – 150-4,000
- Spindle ID Thread (end of spindle) – M56 x 2MM Pitch
Tailstock
- Travel – 5.75″
- Quill Diameter – 2.36″
- Quill Taper Hole – MT#4
Spindle Motor
- Horsepower – 7.5 HP
Machine Power Requirements
- Voltage – 200V to 240V
- Amps, Full Load – 44A
- Phase/Hz – Mar-60
Dimensions
- Net (L x W x H), lbs. – 82″ x 45″ x 72″ – 2,750 lbs.
- Shipping (L x W x H), lbs. – 87″ x 45″ x 70″ – 3,420 lbs.
Other
- Coolant Pump Motor HP – 1/8 HP
- Spindle Motor Brake – Dynamic
- Way Surface Hardness – 480-560 HB
- Headstock Lubrication – Grease
Options
- Tooling Kit – 3/4″
- Chuck – 6″, A2-4
- 5C Collet Closer – A2-4
Turret Option
- 3/4″, 8 Position
- 3/4″, 4 Position