TRAK TMC5

Specifications:

  • Table Size: 27.56″ x 15.75″
  • Travel (x, y, z): 20″ x 16″ x 20″
  • Footprint: 85″ x 129.25″
  • Horsepower: 15/10

The Versatile Machine That Works Two Ways

Toolroom Ops™ – when you need the TMC to work like a TRAK bed mill, but with chips and coolant contained

  • Optional Electronic Handwheels (x, y, and z)
  • Selectable 2 or 3 axis CNC
  • Full DRO for manual operations

Production Ops – when you need to run small to medium production quantities

  • 16-tool carousel tool changer along with manual tool change for additional tools
  • Convenient Tool Table fly out window
  • Fully enclosed ANSI compliant operation
Categories: , ,
Specifications
Table size27.56″ x 15.75″
Travel (X, Y, Z axis) with soft limits20″ x 16″ x 20″
Rapid traverse X, Y, Z400 IPM in Toolroom Ops
1,000 IPM in Production Ops
T-slots (number x width x pitch)3 x .709″ x 3.937″
Spindle taper40 Taper
Spindle speed range50 - 8,000 RPM
50 - 12,000 RPM (optional)
Spindle nose diameter3″
Tool clamping force (90 psi)1,500 lbs
Tool holder typeCAT 40 or BT 40
ATC tool capacity16
Maximum tool weight (incl. holder)15 lbs
Maximum tool diameter3.14″
Carousel speed.8 sec from station to station
Tool selection systemBi-directional/shortest path
Spindle motor HP - peak15 HP
Spindle motor HP - continuous10 HP
Power requirements - Standard (208V) Note 208V (200-240V is acceptable), 3P, 68A
Power requirements - Optional (480V) Note 480V with transformer option (432-528V is acceptable), 3P, 46A
Maximum weight of workpiece1,000 lbs
Height of table from bottom of bed***38″
Min. spindle nose to table distance ****3.5″
Max. spindle nose to table distance ****23.50″
Distance of tool carousel to table18″
Spindle center to spindle head casting face16.50″
Min. machine height ***90″
Max. machine height (head all the way up) ***106.5″
Overall width of machine with side doors open, auger chute and chip container in place159″
Overall length of machine with electrical cabinet fully open 180°146″
Footprint of machine with coolant tank & auger in place and pendant rotated 90° (width x length)92″ x 129.25″
Weight net / shipping (lbs)7,260 / 7,610
Coolant capacity56 gal
Coolant pump and wash power750 Watt
Air - CFM (at 90 psi), SCFM2.5 CFM, 18 SCFM
Air qualityAir dried/water separator upstream of TMC
Lubrication pump capacity2 liter

 

Specifications subject to change.

*** Height changes slightly based on how machine is leveled on leveling screws.

**** Can vary slightly due to home switch location and soft limit settings.

TRAKing® / Electronic Handwheels
The feel of manual control of real handwheels, but our electronic handwheels bring the power of the CNC to
your fingertips through features such as TRAKing and DO ONE.
4th Axis
The TRAK® 4th axis system for Toolroom Machining Centers provides full control of 4th axis machining and
engraving through the ProtoTRAK RMX CNC. The system can also be used as an indexer. Optional tailstock sold separately.
Tailstock - 4th Axis
Support for longer workpieces. This option is sold separately.
Coolant Through Spindle
The TRAK CTS system provides pressurized coolant to remove chips during drilling and tapping work. Compared to flood
coolant, the CTS option can increase tool life, allow for higher spindle speeds and a corresponding reduction of cycle
times, and allow for better surface finishes.
12,000 RPM Spindle
The optional 12,000 RPM spindle features ceramic bearings, and a spindle cooler to minimize temperature rise when running
for long periods of time.
Offline Programming
  • ProtoTRAK RX user interface for Windows® PC
  • Program parts and simulate CNC Run
  • Modify files from current and former ProtoTRAK models
Remote Stop/Go Switch
A hand-held switch to stop and continue program run. Available for purchase at our service parts website: Remote Stop/Go Switch
Tooling Cart & Preset Tool

Huot® ToolScoot cart and preset tool. Tools not included.

Fixture Cart
Heavy-duty cart for the set up and transportation of fixtures.
Tooling Grippers - BT40
Set of 16. Includes mounting hardware.
Retention Knobs - CAT40
For CAT40 tooling. Set of 16.
Kurt® Vise
6" Kurt vise and mounting hardware - model DX6. Opens to 9".
MTConnect®
The TRAK MTConnect option enables customers to add MTConnect functionality quickly and easily to their machines, so that
machine data can be collected using the standard MTConnect protocol.
  • Machine networking through ethernet connection or USB Wi-Fi adapter
  • Collect machine data throughout shop
  • Monitor machine status, receive notifications and analyze data throughout your machines’ history
3rd party software not included.
Parasolid File Converter
  • Import and convert 3D CAD data into ProtoTRAK programs
  • X_T files
  • X, Y & Z dimensions are transferred into program events
  • 2D and 3D views of part
  • Add or remove geometry
  • Chaining
  • Easy, prompted process you can do right at the machine
DXF Converter
  • Import and convert CAD data into ProtoTRAK programs
  • DXF or DWG files
  • Chaining
  • Automatic Gap Closing
  • Layer control
  • Easy, prompted process you can do right at the machine
Auxiliary Functions
Enables programming and control of:
  • Pulse indexer (optional)
  • Auxiliary output to control optional secondary device
TRAK® USB Memory
The USB Memory option consists of an industrial-grade Delkin® Thumb drive. This device is unsurpassed for reliability
and speed of file access and is the storage of choice for our own software engineers.
Other TMC Options
  • Internal Memory Drive
  • CAM File Out Converter
  • Transformer Option