High Speed Precision Machining, Unmatched Performance

The Feeler 5-axis machining center is designed specifically for high precision machining and creating extra fine finish.  Its gantry type structure together with U-shaped base and column brings the structural stability to a new level. The swiveling rotary table diameter is 800mm and capable of resisting heavy loads. This machine is equipped with a 12,000rpm direct-drive spindle that fully satisfies customers’ expectations in high speed and high efficiency machining.

Gantry Type Structure

Designed with a gantry type structure, the Feeler USOO-SAX 5-axis machining center has the feature of spacious machin­ing space, allowing large workpiece to be loaded and unloaded with ease. It is also convenient for operator to check the current machining condition at any time.

U-shaped Construction of Base and Column

• The advanced U-Shape structure significantly increases structural rigidity and machining accuracy.
• X.Y.Z-axis rapid traverse rate reach 48m/min.
• Suitable for equipping with a large diameter of rotary table.

Three Axes Overlap and Separated from Two Rotary Axes

• This design avoids a distance between the machining point and the intersection point of two rotating axes.
• Easy to compensate for the errors of radius on rotating axes and movement on three linear axes to ensure the machine’s stability and accuracy.

Separated Design for Three Axes Moving Area and Machining Area

• This design feature not only makes chip removal more convenient, but also enables better chip-prevention capability of the machine.

A/C axes Tilting Rotary TableDDM
X-axis Travel mm800
Y-axis Travel mm935
Z-axis Travel mm640
A-Axis rotation angle degree+120°~ -120°
C-Axis rotation angle degree360°
Spindle nose to table surface mm85±5 ~ 725±5
Table surface to floor mm900±5
Table dimension mmØ800
Spindle hole diameterØ60H7
T-slot mm7x14
Max. table load kg1200
Working Torque N-mA axis (Tilting axis) 3340
C axis (Rotary axis) 1230
Max. rotation speed
A axis (Tilting Axis) minˉ¹
Max. rotation speed
c axis (Rotary Axis) minˉ¹
Min. indexing unit degree±5"
Spindle Speed minˉ¹Direct drive type 12000 rpm
(Built-in type 24000 rpm)
Spindle taper7/24 Taper No.40
Spindle power kW20/37
X axis rapid traverse m/min48
Y axis rapid traverse m/min48
Z axis rapid traverse m/min48
Tool changing time (tool-to-tool) sec-
Tool changerYlock type
No. of Tools32 (OPT48 - 60)(*2)
Pull studP-40T(45°)
Max. tool weight kg7
Max. tool length mm300
Max. tool diameter mmØ75
Max. tool diameter (no adjacent tool) mmØ125
Floor space mm3220(W)x3900(D)
INE Weight kg17350
Max. machine height mm3600
Power capacity KVA90
Air source bar6-8

*Specifications are subject to change without prior notice.