YCM NXV560A-APC
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T) 1.8 sec.
- Tool Magazine Capacity: 24T
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Pallet Size: 560 x 410 mm 22.04″ x 16.14″
- Table Load Capacity: 120 kg 265 lb
- Distance Between Spindle Nose and Table Top: 25 ~ 475 mm 0.98″~18.7″
- Hole Pattern: M12 x 80 mm x 80 mm M12 x 3.15″ x 3.15″
YCM NXV600A
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
YCM NXV1020A
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle as a standard
- Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/40T opt.)
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
YCM NXV1020AM
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Oil-air lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 15,000 rpm spindle (opt.)
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/40T opt.)
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
YCM NXV1380A
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/48T/60T opt.)
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]
YCM NXV1680A
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T) 1.8 sec.
- Tool Magazine Capacity: 24T (30T/48T/60T opt.)
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]
YCM NXV1680B
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48 kgf-m 347.19 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36 kgf-m 260.39 lb-ft. (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
- Auto Tool Change (T-T): 4.2 sec.
- Tool Magazine Capacity: 32T (24T/40T opt.)
- High Stability Tool Magazine
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Smooth chip removal.
- Quad chip augers (4 Y-axial) system ensures fluent chip removal prevent chips from piling up. [with Rear Side Chip Conveyor (opt.)]