TRAK DPMRX2

TRAK DPMRX2

Like all TRAK DPMRX Series Bed Mills, the DPMRX2 features:

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

With These Important Differences:

  • 49″ x 9″ table size
  • 31.75″ X axis / 16″ Y axis / 25.5″ Z axis travel
  • 3 HP continuous spindle motor
  • R8 spindle taper
Categories: , ,
  • Table size – 49″ x 9″
  • T-slots (number x width x pitch) – 3 x .63″ x 2.5″
  • Travel (X, Y, Z axis) * – 31.75″ x 16″ x 25.5″
  • Quill diameter – 3 3/8″
  • Maximum quill travel – 5″
  • Spindle taper – R8
  • Spindle speed range RPM – 40 – 600, 300 – 5000
  • Spindle center to column face – 18.5″
  • Head swivel (side to side) – +/- 90°
  • Quill feeds per revolution of spindle – 0.0015/0.003/0.006″
  • Spindle motor HP (vari-speed head) – 3 HP
  • Power requirements – machine/control – 200-240V, 3P, 27A
  • Maximum weight of workpiece – 1320 lbs.
  • Height of table from bottom of bed – 36.75″
  • Max spindle nose to table – 25.5″
  • Min height – 86.63″
  • Max height – 91.75″
  • Width of machine including table – 71.25″
  • Length with electrical door closed – 73.31″
  • Length with electrical door open – 93.88″
  • Overall width incl full table traverse – 102.53″
  • Footprint of machine – 23.13″ x 40.5″
  • Weight net / shipping lbs. – 3200 / 3500
  • Rapid traverse X, Y, Z – 250 IPM on X,
    Y and Z with Mechanical Handwheels
    400 IPM on X and Y,
    250 IPM on Z with electronic handwheels
  • Coolant capacity – 10 gallons
  • Drilling max capacity in mild steel – 1″ dia.
  • Milling max capacity in mild steel – 3 inch³/min
  • Tapping max capacity in mild steel – ¾ – 1