» » » TRAK TRL 1845RX

TRAK TRL 1845RX

Like all TRAK RX Lathes, the TRL 1845RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 18″ swing, 45″ between centers
  • Spindle through hole of 2.36″
  • Geared head for excellent performance at slower speeds
  • 10 HP continuous spindle motor
  • Machine efficiency through the full 18″ working diameter
  • High (aluminum) and low (steel) speed range settings
  • Better for heavy cuts on parts with diameters over 4″

Capacity      

  • Height of Centers – 9″
  • Distance Between Centers – 45″
  • Swing over bed – 18.1″
  • Swing Over Saddle Wings – 17″
  • Swing Over Cross Slide – 9.13″
  • Cross Slide Travel – 10.6″
  • Tool Section Max. – 1″
  • Coolant Tank Capacity – 13 gal.
  • Oil Pump – Way Lubrication – 2 Liter
  • Headstock Lubrication – 1.85 gal.

Rapid Speeds

  • 400 ipm on Z Axis
  • 200 ipm on X Axis

Bed   

  • Width of Bed – 13.4″
  • Height of Bed – 12.4″

Headstock   

  • Spindle Nose – D1-6
  • Spindle Through Hole – 2.36″
  • Spindle Taper – MT#6
  • Taper In Reduction Sleeve – MT#4
  • Spindle Dia. At Front Bearing – 3.35″
  • Number of Bearings – 2
  • Speeds/Speed Ranges – 2
  • Spindle Speed Range RPM – 80-850, 250-2,500
  • Spindle ID Thread (end of spindle) – n/a

Tailstock      

  • Quill Travel – 6″
  • Quill Diameter – 2.56″
  • Quill Taper Hole – MT#4

Spindle Motor         

  • Horsepower – 10 HP

Machine Power Requirements  

  • Voltage – 200V to 240V
  • Amps, Full Load – 54A
  • Phase/Hz – Mar-60

Dimensions

  • Net (L x W x H), lbs.- 88″ x 55″ x 70″ – 3,285 lbs.
  • Shipping (L x W x H), lbs. – 91″ x 52″ x 79″ – 3,800 lbs.

Other 

  • Coolant Pump Motor HP – 1/8 HP
  • Spindle Motor Brake – Dynamic
  • Way Surface Hardness – n/a
  • Headstock Lubrication – Oil Bath

Options        

  • Tooling Kit – 3/4″ or 1″
  • Chuck – 8″, D1-6
  • 5C Collet Closer – D1-6

Turret Option

  • 3/4″ or 1″, 8 Position
  • 3/4″ or 1″, 4 Position