| Specifications | |
|---|---|
| Table size | 35.43″ x 19.69″ |
| Travel (X, Y, Z axis) with soft limits | 30″ x 20″ x 20″ |
| Rapid traverse X, Y, Z | 400 IPM in Toolroom Ops 1,000 IPM in Production Ops |
| T-slots (number x width x pitch) | 5 x .709″ x 3.937″ |
| Spindle taper | 40 Taper |
| Spindle speed range | 50 - 8,000 RPM 50 - 12,000 RPM (optional) |
| Spindle nose diameter | 3″ |
| Tool clamping force (90 psi) | 1,500 lbs |
| Tool holder type | CAT 40 or BT 40 |
| ATC tool capacity | 16 |
| Maximum tool weight (incl. holder) | 15 lbs |
| Maximum tool diameter | 3.14″ |
| Carousel speed | .8 sec from station to station |
| Tool selection system | Bi-directional/shortest path |
| Spindle motor HP - peak | 15 HP |
| Spindle motor HP - continuous | 10 HP |
| Power requirements - Standard (208V) Note | 208V (200-240V is acceptable), 3P, 68A |
| Power requirements - Optional (480V) Note | 480V with transformer option (432-528V is acceptable), 3P, 46A |
| Maximum weight of workpiece | 1,000 lbs |
| Height of table from bottom of bed*** | 38″ |
| Min. spindle nose to table distance **** | 3.5″ |
| Max. spindle nose to table distance **** | 23.50″ |
| Distance of tool carousel to table | 17.50″ |
| Spindle center to spindle head casting face | 18.25″ |
| Min. machine height *** | 90″ |
| Max. machine height (head all the way up) *** | 106.5″ |
| Overall width of machine with side doors open, auger chute and chip container in place | 167.25″ |
| Overall length of machine with electrical cabinet fully open 180° | 152″ |
| Footprint of machine with coolant tank & auger in place and pendant rotated 90° (width x length) | 97″ x 135″ |
| Weight net / shipping (lbs) | 8,360 / 8,710 |
| Coolant capacity | 56 gal |
| Coolant pump and wash power | 750 Watt |
| Air - CFM (at 90 psi), SCFM | 2.5 CFM, 18 SCFM |
| Air quality | Air dried/water separator upstream of TMC |
| Lubrication pump capacity | 2 liter |
Specifications subject to change.
*** Height changes slightly based on how machine is leveled on leveling screws.
**** Can vary slightly due to home switch location and soft limit settings.