Home » Uncategorized » TRAK FHM7

TRAK FHM7

The largest mill in our line, with outstanding travels and capacities

Like all TRAK Bed Mills, the FHM7 features:

  • ProtoTRAK SMX CNC
  • A solid ram that moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid construction
  • Two or three-axis CNC operation, your choice
  • Programmable spindle speeds
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces that are hardened and ground, slideways are Turcite® coated

With these important differences:

  • 60” X and 23” Y travel
  • Strong and rigid – over 7600 lbs of machine mass
  • Fixed head for outstanding rigidity
  • Standard electronic handwheels with selectable fine/coarse handwheel resolution
  • NMTB40 spindle taper and over 5” of quill diameter
  • 250 inch per minute rapid travels
Category:
  • Table size – 76″ x 14″
  •  T-slots (number x width x pitch) – 4 x 16mm x 63.5mm
  • Travel (X, Y, Z axis) – 60″ x 23″ x 20.5″
  • Quill diameter – 5.06″
  • Spindle taper – NMTB 40
  • Spindle speed range RPM – 200-5000
  • Spindle center to column face – 23″
  • Spindle motor power – 7.5 HP
  • Power requirement, control – 110V, 1P, 15A
  • Power requirement, machine – 220V, 3P, 60HZ
  • Current, Full Load Amps – 37.5 FLA
  • Maximum weight of workpiece – 2200 lbs.
  • Height of table from bottom of bed – 38.25″
  • Maximum spindle nose to table – 21.5″
  • Minimum height – 95.5″
  • Maximum height – 101″
  • Width of machine including table – 110.5″
  • Length with electric box door closed – 93.75″
  • Overall width including full table travel – 171.65″
  • Overall length with electrical door open – 119.5″
  • Footprint – 37″ x 62.2″
  • Way surface – dovetail X axis; square ways Y and Z axis
  • Weight (approximate) net – 7650 lbs.
  • Weight (approximate) shipping – 7975 lbs.
  • Drilling max capacity – 1″ dia.
  • Tapping max capacity – 5/8″
  • Milling max capacity – 7 inch3/min
  • Way surfaces hardened and ground
  • Turcite coating on all slide ways
  • Automatic lubrication pump
  • Auxiliary function hardware
  • Limit switches
  • TRAKing/Electric Handwheels