Home » Machine Tools » Manual Machines » Select Machine LC-185VS

Select Machine LC-185VS

Vertical Knee Type Milling Machine

Description

ISO 9002 Certified: 

  • Quality Up To World Industry Standards.

Meehanite Casting: 

  • Highest Grade Of Casting Possible.

A Pair Of High Out-Put Fans: 

  • Keeps Head And 3 Hp Motor Cool, To Run Jobs For Extended Periods Without Damaging The Motor, Belts And Bearing.

A Pair Of Precision Abec-7 Angular Contact Bearings To Support Spindle.  The Quill Is Ground   And Chromed To Fit The Housing: 

  • This Insures A Spindle Runout Of .0002” T.I.R.

Motor Shaft And Vari drive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter: 

  • For Smooth Speed Changes.

Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End: 

  • To KeepVari-Drive Pulley Moving Smoothly On The Shaft.

The Mill Uses A Roller Bearing For The Lower Support Of The Shaft: It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt:

  • For Quiet, Accurate Operation At Any Speed For Years And Years.

One Shot Lubrication System: 

  • For Lubrication Of Ways And Lead Screws. (X,Y And Z Axis)

Hand Scraped Saddle And Knee:

  • For Better Oil Retention.  It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.

Oil Groove Are Milled: 

  • For Maximum Lubrication On All Wear Areas.

Table And Saddle Backlash Is Controlled By Double Nut Design: 

  • Keeps Lead Screw In Contact With Bronze Nuts A All Times To Keep Backlash At .0008” Within 20”.

Table And Saddle Are Mounted With Thrust Bearings That Are Pre-Loaded: 

  • Eliminating End Play For Precisely Controlled Lateral Movement.

Patented Knuckle Design Uses 6 T-Bolts, 3 Per Side, Securing Them From The Outside: 

  • This Method Locks The Head Securely Resulting In Better Accuracy And Performance.
Table Size 50” x 10”
Travel:
X 35”
Y 16.3”
Knee 15.75”
Maximum Quill Travel 5”
Quill Diameter 3-3/8”
Spindle Taper R8
Spindle Speed Range 60 – 4500 RPM
Quill Feeds Per Revolution In Auto Feed 0.0015”, 0.003”. 0.005”
Spindle Motor 3 Hp
Power Requirement 230V/460V, 3Phase, 60 Hz
Machine Weight 3,000 lbs
Machine Dimensions 70”W x 75”D x 88”H

AVAILABLE OPTIONS:

Digital Variable Speed Head
Digital Readout System
Table, Saddle, and Knee Powerfeed
Power Drawbar
Automatic Lubrication
Work Lamp