| DESCRIPTION | FSG-1224ADIII | FSG-1632ADIII | FSG-1640ADIII |
|---|---|---|---|
| Table Size | 11 3/4" x 23 5/8" | 15 3/4" x 31 1/2" | 15 3/4" x 31 1/2" |
| Max Grinding Length Longitudinal | 24" | 32" | 40" |
| Max Grinding Width Crosswise | 12" | 16" | 16" |
| Max Distance from Table Surface to Spindle Centerline | 24" | 24" | 24" |
| Longitudinal Movement of Table: Longitudinal Travel, Hydraulic | 25 5/8" | 15 3/4" x 31 1/2" | 15 3/4" x 31 1/2" |
| Maximum Travel, Manual | 27 1/2" | 35 3/8" | 43 1/4" |
| Table Speed, infinitely variable | 5~25 m/min. | 5~25 m/min. | 5~25 m/min. |
| Rapid travel, approx. | 3.5m/min. | 3.5m/min. | 3.5m/min. |
| Automatic Transverse Increment | 2.9m/min. | 2.9m/min. | 2.9m/min. |
| Maximum Automatic Travel | 12" | 16" | 16" |
| Maximum Manual Travel | 13 3/4" | 18" | 18" |
| Handwheel per revolution | 0.25" | 0.25" | 0.25" |
| Handwheel per graduation | 0.0025" | 0.0025" | 0.0025" |
| Microfeed per revolution | 0.005" | 0.005" | 0.005" |
| Microfeed per graduation | 0.00005" | 0.00005" | 0.00005" |
| Wheelhead Vertical Infeed: Automatic Infeed | 0.000050"-0.002" | 0.000050"-0.002" | 0.000050"-0.002" |
| Rapid Travel, approx | 25ipm | 25ipm | 25ipm |
| Grinding Spindle Drive Speed | 60Hz1750rpm; 50Hz1450rpm | 60Hz1750rpm; 50Hz1450rpm | 60Hz1750rpm; 50Hz1450rpm |
| Power rating | 5HP/4P | 5HP/4P | 5HP/4P |
Chevalier FSG-ADIII Automatic Series
The FSG-ADIII series features a new user-friendly touch-screen control with standard surface grinding programs and a plunge grinding cycle. There is also an optional crisscross or zigzag and a CBN dressing cycle. So simple and user-friendly, all skill levels can operate this series of ADIII controllers.
The fully automatic grinding mode consists of rough- and fine-grinding cycles, switching from rough-grinding down-feed increments to fine-grinding down-feed increments at preset points during the cycle. This crossfeed also switches from a rough to fine cross-feed increment, which results in a finer surface finish and finer accuracy.
• No more cycle stops or prepping the wheel
• Faster cycle times
• Chevalier control: touch screen
• 3-Axes Fully Automatic
• Table size: up to 16″W x 40″L
• Auto. dressing and compensation optional
• Elevation is driven by servo motor
• 3-Axes needle roller way
• Max. grinding sizes: up to 16″ x 40″
• Spindle power: up to 10 HP, greater spindle HP available