» » » Select Machine LC-150VS

Select Machine LC-150VS

Vertical Knee Type Milling Machine

Description

ISO 9002 Certified:

  • Quality Up To World Industry Standards.

Meehanite Casting:

  • Highest Grade Of Casting Possible.

A Pair Of High Out-Put Fans:

  • Keeps Head And 3-Hp Motor Cool, To Run Jobs For Extended Periods Without Damaging The Motor, Belts And Bearing.

A Pair Of Precision ABEC-7 Angular Contact Bearings To Support Spindle.  The Quill Is Ground And Chromed To Fit The Housing:

  • This Insures A Spindle Runout Of .0002” T.I.R.

Motor Shaft And Varidrive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter:

  • For Smooth Speed Changes.

Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End:

  • To Keep Vari-Drive Pulley Moving Smoothly On The Shaft.

The LC-150VS Mill Uses A Roller Bearing For The Lower Support Of The Shaft: It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt:

  • For Quiet, Accurate Operation At Any Speed For Years And Years.

One Shot Lubrication System:

  • For Lubrication Of Ways And Lead Screws. (X,Y And Z-Axis)

Hand Scraped Saddle And Knee:

  • For Better Oil Retention.  It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.

Oil Groove Are Milled:

  • For Maximum Lubrication On All Wear Areas.

Table And Saddle Backlash Is Controlled By Double Nut Design:

  • Keeps Lead Screw In Contact With Bronze Nuts An All Times To Keep Backlash At .0008” Within 20”.

Table And Saddle Are Mounted With Thrust Bearings That Are Pre Loaded:

  • Eliminating Endplay For Precisely Controlled Lateral Movement.

Patient Knuckle Design Uses 6 Bolt 3 Per Side, Securing Them From The Outside:

  • This Method Locks The Head Securely Resulting In Better Accuracy And Performance.

Ways Are Hard Chrome Dovetail On Saddle And Column.

Table Size 50” x 9”
Travel:
X 38”
Y 12”
Knee 16”
Maximum Quill Travel 5”
Quill Diameter 3-3/8”
Spindle Taper R8
Spindle Speed Range 60 – 4500 RPM
Quill Feeds Per Revolution In Auto Feed 0.0015”, 0.003”. 0.005”
Spindle Motor 3 Hp
Power Requirement 220V or 440V/ 3 Phase
Machine Weight 2,500 lbs.
Floor Space 7’W x 6.5’D x 6.75H

AVAILABLE OPTIONS:

Digital Variable Speed Head
Digital Readout System
Table, Saddle, and Knee Powerfeed
Power Drawbar
Automatic Lubrication
Work Lamp