trak-logo-2019

Retrofit EMX, KMX, SMX Kits
Retrofit EMX, KMX, SMX Kits
A great productivity investment

The more frugal you are, the more painful it should be to watch your people spend their time unproductively.  The cost of the ProtoTRAK CNC is trivial when compared to the cost of the person standing in front of the machine.  If you are going to keep and use the machine, retrofit it.

Even a machine that has some wear can be a good candidate for a retrofit. Ballscrews will be installed in the table and saddle and electronic machine tool error calibration and backlash compensation routines help maintain accuracy. If the head is in good condition, you probably have a useful machine.

We only retrofit small knee mills and our expertise is honed by twenty years’ experience and over 15,000 successful retrofits. The retrofit kit includes everything: motors, CNC, hardware, ballscrews, fasteners, even the cable ties. It is installed in your shop in about a day by a factory-trained technician. Custom kits for dozens of machines are available in either two or three-axis CNC.

You shouldn’t stop investing in productivity until all your machinists are working as efficiently as possible. Retrofitting can be a cost-effective way for you to reach that goal.

Read more
TRAK 2op
TRAK 2op

The first portable CNC to focus on Second Operations.

Make dramatic improvements to your productivity by:

  • Reducing production cycle times
  • Improving labor utilization
  • Reducing planning and organization

 

Read more
TRAK DPMRX2
TRAK DPMRX2

TRAK DPMRX2

Like all TRAK DPMRX Series Bed Mills, the DPMRX2 features:

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

With These Important Differences:

  • 49″ x 9″ table size
  • 31.75″ X axis / 16″ Y axis / 25.5″ Z axis travel
  • 3 HP continuous spindle motor
  • R8 spindle taper
Read more
TRAK DPMRX3
TRAK DPMRX3

Like all TRAK DPMRX Series Bed Mills, the DPMRX3 features:

 

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually 

With These Important Differences:

  • 50″ x 10″ table size
  • 31.5″ X axis / 17″ Y axis / 25.81″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
Read more
TRAK DPMRX5
TRAK DPMRX5

Like all TRAK DPMRX Series Bed Mills, the DPMRX5 features:

 

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

With These Important Differences:

  • 50″ x 12″ table size
  • 40″ X axis / 20″ Y axis / 25.81″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
  • Almost 4″ quill diameter
  • Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
  • Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
Read more
TRAK DPMRX7
TRAK DPMRX7

Like all TRAK DPMRX Series Bed Mills, the DPMRX7 features:

  • ProtoTRAK RMX CNC integrated into the machine at the factory
  • TRAKing® — control of program run
  • Solid ram moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid
  • Efficient for any job: manual, 2-axis CNC or 3-axis CNC
  • Standard electronic head for programmable spindle speeds and tapping
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite®coated
  • Real handwheels so you can work manually

 With These Important Differences:

  • 76″ x 14″ table size
  • 60″ X axis / 23″ Y axis / 24.25″ Z axis travel
  • 5 HP continuous spindle motor
  • 40 taper spindle
  • 56″ quill diameter
  • Rapid speeds of 400 IPM on X and Y, 250 IPM on Z
  • Standard Electronic Handwheels with selectable fine/coarse handwheel resolution
  • 7,480 lbs. of machine mass
Read more
TRAK TRL 1630HS-RX
TRAK TRL 1630HS-RX

Like all TRAK RX Lathes, the TRL 1630HS-RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 16″ swing, 30″ between centers
  • Spindle through hole of 1.57″
  • 150-4000 rpm
  • At home in a lab or wherever smaller parts are made
Read more
TRAK TRL 1630RX
TRAK TRL 1630RX

Like all TRAK RX Lathes, the TRL 1630RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 16″ swing, 30″ between centers
  • Spindle through hole of 2.12″
  • 150-2500 rpm
  • Ideal for small parts, but a generous swing for versatility
Read more
TRAK TRL 1845RX
TRAK TRL 1845RX

Like all TRAK RX Lathes, the TRL 1845RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 18″ swing, 45″ between centers
  • Spindle through hole of 2.36″
  • Geared head for excellent performance at slower speeds
  • 10 HP continuous spindle motor
  • Machine efficiency through the full 18″ working diameter
  • High (aluminum) and low (steel) speed range settings
  • Better for heavy cuts on parts with diameters over 4″
Read more
TRAK TRL 2470RX
TRAK TRL 2470RX

Like all TRAK RX Lathes, the TRL 2470RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • 24″ swing, 70″ between centers
  • Generous 4.09″ spindle through hole
  • 15 HP continuous spindle motor
  • Geared head for good performance at low speeds
  • Tapered roller bearings
  • High (aluminum) and low (steel) speed range settings
Read more
TRAK TRL 30120RX
TRAK TRL 30120RX

Like all TRAK RX Lathes, the TRL 30120RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • Gap bed lathe with 43.5″ swing over 15.5″ gap
  • 118″ between centers with 121″ maximum cutting length
  • Large 6.30″ spindle through hole
  • 17″ of cross slide travel
  • 30 HP continuous spindle motor
  • Interface for rear chuck
  • High (aluminum) and low (steel) speed range settings
  • Coolant pump – standard equipment
  • 3 work lights – standard equipment
Read more
TRAK LPM
TRAK LPM

A unique answer to the problems of small run production

  • Ideal for jobs that run in a few hours or a couple of days
  • Great for machinists who already know ProtoTRAK
  • Shop floor production system that one man can run
  • “Problem jobs” that don’t fit into the production system or the toolroom
Read more
TRAK K3EMX
TRAK K3EMX

Quality iron with the ProtoTRAK EMX CNC factory integrated.  It is ideal when simplicity and basic CNC capability is required.

Where simplicity and basic CNC capability is required.

  • ProtoTRAK EMX CNC
  • Manual quill with DRO
  • Precision 7207 P4 spindle bearings
  • Chrome ground quill
  • Meehanite® castings
  • Slide ways are Turcite® coated
  • Standard glass scale for quill Z readout
  • Precision ground ballscrews installed in the table and saddle
  • Wide way surfaced are hardened and ground
  • Real handwheels for working manually
Read more
TRAK K3KMX
TRAK K3KMX

TRAK Knee Mills with the KMX CNC are available as three-axis CNCs, with a quill drive for Z-axis machining. The mill can be run manually, as a two-axis or three-axis CNC. Manual quill control is with our unique Electronic Handwheel.

Outstanding Support at no Extra Cost Only TRAK Knee Mills featuring ProtoTRAK CNCs are factory-integrated by us, the manufacturer of the control. That means an outstanding product and one source of parts and support. You will never be shuffled between machine and CNC supplier – the entire product is our responsibility.

 Standard on all K3 Knee Mills

  • ProtoTRAK® integrated at the factory
  • Precision 7207 P4 spindle bearings
  • Glass scale for quill Z readout
  • Precision ground ballscrews installed in the table and saddle
  • Chrome ground quill
  • Wide way surfaces are hardened and ground
  • Slideways are Turcite® coated
  • Real handwheels so you can work manually
  • Meehanite® castings

K3 Knee Mill Features

  • 50″ x 10″ table size
  • R8 spindle taper
  • 60-4200 RPM spindle speed
  • Head tilt (forward and backward) +/- 45°
  • Head swivel (side to side) +/- 90°
Read more
TRAK K3SX
TRAK K3SX

The flexibility of a knee mill with the world’s most advanced CNC for small lot work.

For more advanced knee mill applications, such as those entailing complex profiles or repeat programs.

  • ProtoTRAK SMX CNC
  • 2-axis CNC, 3-axis DRO
  • Manual quill with DRO
  • Precision 7207 P4 spindle bearings
  • Chrome ground quill
  • Meehanite® castings
  • Slide ways are Turcite® coated
  • Standard glass scale for quill Z readout
  • Precision ground ballscrews installed in the table and saddle
  • Wide way surfaces are hardened and ground
  • Real handwheels for working manually
Read more
TRAK K3SX-3
TRAK K3SX-3

Combines advanced 3-axis CNC capability with a unique electronic handwheel to enable manual quill operation for 2-axis CNC and manual work.

  • ProtoTRAK SMX CNC
  • 3-axis CNC, 3-axis DRO
  • Precision 7207 P4 spindle bearings
  • Chrome ground quill
  • Meehanite® castings
  • Slide ways are Turcite® coated
  • Standard glass scale for quill Z readout
  • Precision ground ballscrews installed in the table and saddle
  • Wide way surfaces are hardened and ground
  • Real handwheels for working manually
Read more