TRAK TRL 30120RX
TRAK TRL 30120RX

Like all TRAK RX Lathes, the TRL 30120RX features:

  • ProtoTRAK RLX CNC integrated into the machine at the factory
  • Manual or CNC operation
  • Electronic handwheels and jogstick
  • Brushless servo motors
  • Inverter-duty spindle drive
  • Programmable spindle speeds
  • Constant Surface Speed (CSS) Programming
  • Inch Per Revolution (IPR) Programming
  • Optional TRAKing® for manual control of CNC programs
  • Optional turret for automatic tool changes

With these important differences:

  • Gap bed lathe with 43.5″ swing over 15.5″ gap
  • 118″ between centers with 121″ maximum cutting length
  • Large 6.30″ spindle through hole
  • 17″ of cross slide travel
  • 30 HP continuous spindle motor
  • Interface for rear chuck
  • High (aluminum) and low (steel) speed range settings
  • Coolant pump – standard equipment
  • 3 work lights – standard equipment
Read more
Select Machine Lathes
Select Machine Lathes

Swing Over Bed 14″ to 30″

Distance Between Centers 30″ to 160″

Read more
Kingston HK-HG Series
Kingston HK-HG Series

Swing over bed: HK: 30″ or 34″
Swing over bed: HG: 34″ or 40″
Choice of distance between centers:
80″ / 120″ / 160″ / 200″/ 240″ / 280″
Spindle bore: HK 12.5″, HG 14.5″

• 20HP motor and wiring complete
• 4-way rapid traverse
• Coolant system
• Semi-air threading attachment
• Hardened and grounded bedways
• Double chuck ready

Read more
Kingston HP-HPX Series
Kingston HP-HPX Series

34” / 40″ Swing over bed
Choice of distance between centers:
80″ / 120″ / 160″ / 200″ / 240″ / 280″
Spindle bore: 7.09″ / 9.25″

• 30HP motor and wiring complete
• 4-way rapid traverse
• Coolant system
• Hardened and grounded bedways
• Double chuck ready

Read more
Kingston HR Series
Kingston HR Series

30” / 34“ / 40” Swing over bed
Choice of distance between centers:
80” / 120” / 160” / 200” / 240” / 280”
Spindle bore: 4 1/16

• 20HP motor and wiring
• 4-way rapid traverse
• Coolant system
• Hardened and grounded bedways

Read more
Kingston HD Series
Kingston HD Series

22” / 26“ Swing over bed
Choice of distance between centers:
60” / 90” / 120” / 160”
Spindle bore: 4.0625”

• 10 HP or 15 HP motor
• Center sleeve M.T. #7×5
• Dead center M.T. #5
• Multi-position longitudinal stop
• Complete coolant system
• Hardened and grounded bedways

Read more
Kingston HJ Series
Kingston HJ Series

17“ Swing over bed
Choice of distance between centers:
43.5” / 67”
Spindle bore: 2.25”

• 7.5 HP motor
• 10″ 3-jaw scroll chuck
• Steady rest
• Coolant system
• Hardened and grounded bedways

Read more
TRAK LPM
TRAK LPM

A unique answer to the problems of small run production

  • Ideal for jobs that run in a few hours or a couple of days
  • Great for machinists who already know ProtoTRAK
  • Shop floor production system that one man can run
  • “Problem jobs” that don’t fit into the production system or the toolroom
Read more
Kingston CL-38 Series
Kingston CL-38 Series

A powerful and rigid CNC lathe for versatile applications.

The CL-38 is a perfect machine for heavy duty turning and high precision machining. Designed to be a universal CNC turning lathe, it is suitable for the medium to large workpiece, the barstock, and the shaft. Incorporated with a choice of turrets, it offers flexible working modes in both production and non-production jobs.

• FANUC 0iTC, FANUC 0iTD
• Spindle motor 30 HP
• V8 front turret and H6 rear turret
• Single or double chuck ready

26″ Swing
Choice of distance between centers:
40″ / 60″ / 80″ / 120″ / 160″
Spindle bore: 4.7″”, 7.08””

Read more
Kingston CL-68/78 Series
Kingston CL-68/78 Series

45″/59” Swing
Choice of distance between centers:
80″ / 120″ / 160″ / 200″ / 240″
Spindle bore: 7”, 10”, 14.7″

• FANUC 0iTD
• Spindle motor 50 HP
• V8 front turret and H4 rear turret
• Single or double chuck ready

Read more
Chevalier FSG CNC Series
Chevalier FSG CNC Series

The FSG-H818CNC & FSG-B818CNC grinding machines are high precision, high efficiency multi purpose CNC profile grinders. These machines are designed to meet current and future grinding requirements such as intricate profiles, mold components and are well suited for parts of aircraft, automobile, electronic, medical, machine tool, and defense industries.

Read more
Chevalier Smart Series
Chevalier Smart Series

The SMART-III Series is capable of producing “mirror” finishes on highly accurate workpieces, which produce microfinishes of 5 RMS or better. The positioning accuracy 0.00015″ to 0.00023″ and the repeatability is 0.00012″ to 0.00023″. The SMART-III’s movements are programmable in increments of 0.0001″.

Read more
Chevalier FSG SP Manual Series
Chevalier FSG SP Manual Series

These models have all the features of the Chevalier M Series Grinders but with heavier and more rigid construction.

Read more
Chevalier Manual M Series
Chevalier Manual M Series

M Series Standard Tool Room Surface Grinder.

Read more
Chevalier FSG-ADIII Automatic Series
Chevalier FSG-ADIII Automatic Series

The FSG-ADIII series features a new user-friendly touch-screen control with standard surface grinding programs and a plunge grinding cycle. There is also an optional crisscross or zigzag and a CBN dressing cycle. So simple and user-friendly, all skill levels can operate this series of ADIII controllers.

The fully automatic grinding mode consists of rough- and fine-grinding cycles, switching from rough-grinding down-feed increments to fine-grinding down-feed increments at preset points during the cycle. This crossfeed also switches from a rough to fine cross-feed increment, which results in a finer surface finish and finer accuracy.

• No more cycle stops or prepping the wheel
• Faster cycle times
• Chevalier control: touch screen
• 3-Axes Fully Automatic
• Table size: up to 16″W x 40″L
• Auto. dressing and compensation optional
• Elevation is driven by servo motor
• 3-Axes needle roller way
• Max. grinding sizes: up to 16″ x 40″
• Spindle power: up to 10 HP, greater spindle HP available

Read more
Chevalier FSG Semi-Automatic Series
Chevalier FSG Semi-Automatic Series

• 2A 2-Axes and X-Axis driven by Hydraulic system • Table size: up to 12”W x 24”L • Z-Axis with Double “V” ways and electric motor • Hand scrapped Turcite-B used on Z- and Z-Axes • Spindle speed: 3500/1750rpm • … Read More

Read more
Chevalier FSG-2A818/3A818 Automatic Series
Chevalier FSG-2A818/3A818 Automatic Series

Series features a smooth and accurate movement with low friction to ensure high accuracy and longer way life. The proximity switches let the operator set the right stroke for each workpiece. The precision 0.0001″ graduated microfeed device (worm and wormgear design) ensures precise positioning of the cross axis.

• Vertical feed is driven by AC motor and equipped with automatic downfeed device and manual microdownfeed device
• Cross movement is driven by AC motor
• Longitudinal table movement is driven by hydraulic unit
• Table traverses on hardened & ground guideways w/ steel ball bearings
• Turcite-B laminated and hand-scraped machine slideways
• Table reversing mechanism
• Elevating microfeed device

Read more
Chevalier CGP Hydraulic Cylindrical Series
Chevalier CGP Hydraulic Cylindrical Series

Hydraulic Cylindrical Grinder with heavy-duty hydrostatic spindle bearings

• Hydrostatic bearings for precision grinding
• Precision ballscrew with AC digital motor
• Mitsubishi PLC control with touch screen
• Wheelhead repeatability ±0.000050″
• Variable speed workhead 16-450rpm
• Automatic dresser w/ compensation (opt)
• Internal grinding attachment (opt)

Read more
Chevalier CGP Cylindrical Series
Chevalier CGP Cylindrical Series

Universal cylindrical grinder with heavy-duty hydrostatic spindle bearings

• Hydrostatic spindle bearings for precision grinding
• Precision ballscrew driven by AC digital servo motor
• Mitsubishi PLC control with touch screen operation
• Wheelhead repeatability of ±0.000050”
• Variable speed workhead 16-450rpm, 0.8kw AC servo motor
• Table travels on one V, one flat guideway
• Fully ribbed, high grade Meehanite cast iron
• Tailstock center is capable of absorbing thermal expansion of workpiece
• Rough grinding, fine grinding and sparkout in one setting
• Wheel head retract to original setting point after grinding cycle is complete

Read more
Newall DP700 Digital Readout
Newall DP700 Digital Readout

The DP700 is the latest in Newall’s line of a powerful and intuative DROs. The unit is housed in a rugged, ergonomically designed casting. The DRO features all of the essential functions for milling, boring, turning, grinding, and general machining operations.

  • Available in 1, 2 or 3 axes
  • Clean, Crisp, Easy to Read, LEDs
  • Intuitive Message Window
  • Long Life Membrane Keypad
  • Solid cast construction
  • Safe, Low Voltage Power Supply (UL)
  • Panel Mount Version Available
Read more
Newall DP1200 Digital Readout
Newall DP1200 Digital Readout

The DP1200 was designed specifically for long travel machine tools.  It includes features that are essential for increasing productivity on boring mills, VTLs, milling machines and long travel lathes.  Built with the operator in mind, the DP1200 includes large, clear numerical displays and an intuitive color TFT message screen along with an optional DSU

  • Available in 2, 3 or 4 axes (inlcuding rotary / angular)
  • Clean, Crisp, Extra Large, LEDs
  • 3.5″ TFT LCD diplay – high density, high contrast
  • User Definable Axis Legends
  • Solid Cast Construction
  • Long Life Membrane Keypad
  • Safe, Low Voltage Power Supply (UL)
  • Panel Mount Version Available

.

Read more
Standard Industrial Straight Side Hydraulic Presses
Standard Industrial Straight Side Hydraulic Presses

Model AM Straight Side Press

The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model AM also allows front to back off-center loading within +,- 6″ of the centerline of the bed. If off-center loading is required the entire front to back width of the bed then the model CM press should be considered. Contact the factory for details on the differences in these presses.

The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses however has a smaller price tag than the extremely heavy duty CM style presses. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model AM is designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The AM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

CM Straight Side Press

The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.

The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

DCS Straight Side Press

The model DCSS is the pinnacle of the straight side press configuration, there simply is no design that is more heavy duty. Built similarly to the DC style press, the DCSS takes yet another step toward providing the most frame strength available on any press on the market. The DCSS has enclosed end frames in lieu of the gap therefore allowing the least amount of deflection and the most rigidity. The operator can still however have material or die pass through with windows located in the end frames. Built with the same hydraulic system and solid welded construction as the DC, the DCSS gives you another layer of strength for even the most punishing applications. Typically the bed and ram would stay within the frames, but optionally you can order the DCSS with ram and/or bed extensions to extend beyond the frames to give you even more die area.

The DCSS is also available up to 1,000 tons and is perfect for center load and off center loads left to right and /or front to back as well as virtually any other press application. A hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

Read more
Standard Industrial C-Frame Hydraulic Presses
Standard Industrial C-Frame Hydraulic Presses

MODEL CC C-FRAME PRESS The model CC C-frame press is perfect for applications requiring center-loads or even tonnage across the bed. Available in tonnages from 35 up to 300 tons (larger tonnages available with special quote). A Hydraulic press of … Read More

Read more
Standard Industrial 4-Column Hydraulic Presses
Standard Industrial 4-Column Hydraulic Presses

The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machined platen is fitted with bearings made of A660 bronze and rides on 4 columns of turned, ground & polished chrome steel. The massive structure is fabricated from heavy sections of prime steel plate. This press is designed for heavy production work for all sizes of facilities. The self-contained hydraulic system uses a hi-low circuit using directional valves for speed control. As with all Standard Industrial machines, the model AP comes with our unmatched 5 year warranty, plus T-slots in the bed and ram, a decompression system, overload protection and many more impressive standard features.

Model AP1000 (1,000 ton) shown with optional rubber pad enclosure mounted under ram. All other features shown are standard equipment.

Read more
Standard Industrial Shears
Standard Industrial Shears

Standard Industrial Shears
The model AS shear is a 100% U. S. Made hydraulic, true guillotine drive shear with many standard features and an extremely wide variety of options to choose from. The hydraulics and electrics are complete including oil filter, disconnect switch, magnetic starter and control voltage transformer. A set of premium, four edge blades with shock resistant, chrome alloy are standard on all new shears. There is not a more heavy duty, versatile shear manufactured in the U.S.A. or any other country.

Component Availability
As with all Standard Industrial machinery, all hydraulic and electric components are readily available off the shelf from your local suppliers. These components are available today and will be available thirty years from now from such major suppliers like Siemens electrics and Vickers hydraulics. With Standard Industrial you have our substantial 5 year parts warranty and after the warranty you have the luxury of buying locally or from us giving you a lifetime supply of replacement parts that are readily available.

The Bellcrank Linkage System
The model AS is a hydraulic shear with the advantage of full tonnage throughout the stroke, and full tonnage throughout the length of the table during the entire shearing process from start to finish. Our system features a single hydraulic cylinder, this one large bore cylinder powers the bellcrank linkage system. This system has the advantage of a positive, precision mechanical drive coupled with the ease and safety of a hydraulic power plant. There are not multiple cylinders or pivoting swing-beam drives causing distortion. This drive system is how we provide full tonnage along the table and there is no balancing required, just straight tonnage.

Read more
Standard Industrial Press Brakes
Standard Industrial Press Brakes

Applications

  • Full length bends where full tonnage across the bed is a necessity for the truest bends
  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed – each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime
Read more
Hydmech Saws
Hydmech Saws

We carry the complete line of Hydmech Saws.

Read more
Excetek WG-Series
Excetek WG-Series

Stronger, Faster, Simpler – Now Better Than Ever with NEW Windows Based XP Control.

Superb Design & Construction
Rigid, heavily ribbed high-grade Meehanite castings. Reinforced water-cooled lower arm is made of high-strength alloy for maximum stiffness.

Premium Grade Components
Ultra-precise direct-couple drive system – no belts. Fine pitch, ultra fine-finish ball screws and high resolution servo motors with 4 millionths resolution. Glass scales.

Leading Edge Electronics
Electrolysis-free machining. Digital Power Manager Technology. Superb accuracies and finishes up to RA 0.3um.

Windows Based XP Control
Feature-packed control is easy-to-use, versatile and has a large 15” easy-to-read, full color touch screen display.

Intelligent Servo Controlled Wire Threading Technology
Saves time, easy to use – threads at wire break point. No need to return to start point. Under 10 second spark-to-spark time with total reliability!

Read more
Select Machine LC-142VS
Select Machine LC-142VS

Vertical Knee Type Milling Machine

Read more
Select Machine LC-150VS
Select Machine LC-150VS

Vertical Knee Type Milling Machine

Read more